Period Maintenance; Service Shop Maintenance; Disposal Of The Machine - Kemppi 350 Operating Manual

7.2

PeriOd MaintenanCe

Period maintenance should only be carried out by a suitably qualified person. Disconnect
NOTE!
the plug of the machine from the mains socket and wait approx.2 minutes (capacitor charge)
before removing the cover plate.
Check at least every half year:
• Electric connectors of the machine – clean any oxidized parts and tighten loose
connections.
You must know the correct tension torques values before starting the reparation of the loose
NOTE!
joints.
Clean the inner parts of the machine from dust and dirt e.g. with a soft brush and vacuum
cleaner. Also clean the ventilation net behind the front grill.
Do not use compressed air, there is a risk that the dirt will compact even more tightly into
gaps of cooling profiles.
Do not use pressure washing devices.
Only an authorized trained electrician should carry out repairs to Kemppi machines.
7.3

serViCe shOP MaintenanCe

Kemppi Service Workshops complete maintenance according to their Kemppi service
agreement.
The major points in the maintenance procedure are listed as follows:
• Cleaning of the machine
• Checking and maintenance of the welding tools
• Checking of connectors, switches and potentiometers
• Checking of electric connections
• Checking of mains cable and plug
EN
• Damaged parts or parts in bad condition are replaced by new ones
• Maintenance testing.
• Operation and performance values of the machine are checked, and when necessary
adjusted by means of software and test equipment.
software loading
Kemppi Service Workshops can also test and load firm ware and welding software.
8.

disPOsal OF the MaChine

Do not dispose of electrical equipment with normal waste!
In observance of European Directive 2002/96/EC on waste electrical and electronic
equipment, and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and taken to an appropriate
environmentally responsible recycling facility.
The owner of the equipment is obliged to deliver a decommissioned unit to a regional
collection centre, per the instructions of local authorities or a Kemppi representative. By
applying this European Directive you will improve the environment and human health.
22