Call Block; Intercom Dialing; Using An Authorization Code; Using Billing Codes - Cisco 7905 User Manual

Action Step 1
•
Dial *60 or
•
A voice prompt indicates
whether

Call Block

enabled or disabled
Call Block
Intercom
There is no
Dialing
•
Pickup the handset and
Using an
9# + the Authorization
Authorization
code (provided by your
Xutel ExChange System
Code
Administrator)
•
During an active call, dial
Using Billing
+ the Billing Code
Codes
Xutel ExChange
Cisco 7905/7912 User Manual-v1.0
Step 2
•
*80 Press 1 – to enable or
disable Call Block
•
is Press 2 – to add last call
received to the list
•
Press 3 – to add a new #
to the list
Intercom Feature available on the Cisco 7905/7912
•
dial When a correct code is
entered, you will hear a
dial tone
NOTE: Billing Codes are
*02
provided by your office
management
Step 3
•
Press 4 – to hear the current
list
•
Press 5 – to delete numbers
from the Blocked list
•
Press * - to repeat the menu
•
Enter the number you wish
to reach
NOTE: Billing Codes will
appear in the Call Detail Records
(CDR) on the monthly
VoicePipe invoice statement
Xutel ExChange
Step 4
NOTE: When call blocking is
activated for a specific number,
the caller will hear a recorded
message that you are not
accepting calls.
NOTE: This feature is more
easily configured through the
Xutel ExChange Web Portal.
6 of 10
02/11/05