Call Block (Selective Call Rejection); Call Forward (All Calls) - Cisco IP Talk 7940 Reference Manual

To enter a billing Code for a Call using the Menu
Press the More softkey twice
•
Press the Billing softkey
•
Enter the billing code for the call using the
•
numeric keypad
Press the More softkey twice
•
Press the Billing softkey
•
Note: The other party will not hear key DTMF tones
as you make entries . If you enter multiple billing codes
during a call, only the last billing code will be recorded .
Call bloCK (seleCTiVe
Call reJeCTion)
With Call Block you can program your phone to
decline calls from certain people . The Call Block
Menu provides step-by-step instructions on enabling/
disabling the feature and managing the Call Block List .
To access the Call block Menu
Lift the handset, dial *60 and follow the voice prompts
•
Note: When entering an external telephone number to
the Call Block List, enter the 10-digit number . Do not
include the Outside Access Digit .

Call forWard (all Calls)

Call Forward (All Calls) lets you forward incoming
calls to another number .
To enable/Modify Call forwarding using the Menu
Press the Line button for the line to forward
•
Press the Forward softkey
•
Enter the telephone number for the forwarding
•
destination . When entering an external forwarding
number, be sure to include the Outside Access Digit .
Press the EndCall softkey
•
To enable/Modify Call forwarding using star Codes
Lift the handset and dial 72*
•
Enter the phone number for the forwarding
•
destination followed by # . When entering an
external forwarding number, be sure to include
the Outside Access Digit .
6