Setting Daylight Savingtime - Jackson Systems T-32-TS User Manual

SETTING DAYLIGHT SAVINGS TIME
Your thermostat has been configured for Daylight Savings Time. If this feature does
not apply in you location, ask your contractor to disable it. You will need to set the
Daylight Savings Time schedule each calender year. (Refer to the DST Chart) Touch and
hold down on the clock. The time
month will flash. Tap the UP or DOWN arrow to set the proper month based on the
DST Chart then tap the clock. The day of the month will flash. Tap the UP or DOWN
arrow to set the proper day of the month and then tap the clock. The year will flash.
Tap the UP or DOWN arrow to set the year and then tap the clock.
and the month will flash. Follow the same steps above by entering the month, day and
year that DST ends then tap the clock. The thermostat will return to its operating
mode in 10 seconds.
AM
DST
03/11/2012 Begin
Ends
2:00 AM will appear along with
DAYLIGHT SAVINGS CHART
2012 BEGIN 03/11
2013 BEGIN 03/10
2014 BEGIN 03/09
2015 BEGIN 03/08
6
Begin and the
Ends will appear
ENDS 11/04
ENDS 11/03
ENDS 11/02
ENDS 11/01