Jackson Systems T-32-TS User Manual page 22

PROGRAMMING
7-DAY SCHEDULE (4 OR 2 DAILY EVENTS)
Tap Program again and the Day start time will appear. The hour will flash along with
AM or PM. Follow the same steps in the Morning sequence. The factory defaults for
° °
the Day event are 8:00 AM, Heat Set 62 F, Cool Set 78 F .
After setting the Day Cool Set temperature, Tap Program again and the Evening start
time will appear. Follow the same steps. The factory defaults for the Evening event are
° °
6 :00 PM, Heat Set 70 F, Cool Set 75 F .
After setting the Evening Cool Set temperature, Tap Program again and the Night start
time will appear. Follow the same steps. The factory defaults for the Night event are
° °
10:00 PM, Heat Set 62 F, Cool Set 78 F .
Tap Program again and the word cpy (copy) will appear. If you want to copy the
Monday schedule to consecutive days of the week, tap the UP arrow to add additional
days. Each day that you add will flash. For example, you might want to copy the
Monday schedule to Tuesday and Wednesday. Once Tue and Wed are flashing, tap
Program and cpy will flash confirming that the Monday schedule is being copied to
Tuesday and Wednesday. The thermostat will then advance to Thu (Thursday).
21