Mode Selection - Jackson Systems T-32-TS User Manual

BASIC FUNCTIONS

MODE SELECTION

To select a mode of operation, simply tap the
equipment and thermostat configuration, mode selection can be as follows:
Off - Thermostat will not call for heating or cooling.
Heat - Thermostat only controls heating. When the heating system is running, the
Heat symbol will flash.
Cool - Thermostat only controls cooling. When the cooling system is running, the
symbol will flash.
Mon
AM Cool
Set
DST
01/01/2012
Automatic
Morning
Mode box on the screen.
Auto - Thermostat controls both
heating and cooling.
flash when the equipment is running.
E. Heat - Emergency heat for heat
pump and fossil fuel systems in the
event the heat pump fails. Only
displayed when thermostat is
Cool
configured for heat pump equipment.
8
Based on
Cool
Heat or Cool will