Auto Mode; Basic Functions 7 - Jackson Systems T-32-TS User Manual

BASIC FUNCTIONS
CHANGING THE HEATING OR COOLING TEMPERATURE SETTING

Auto Mode

In Auto changeover mode, the heating or cooling temperature settings alternate on
the screen. To change the settings, simply tap the temperature displayed on the
screen. Heat Set will flash for five times and then Cool Set will flash five times
To change the heating setting, tap the UP or DOWN arrow to change the setting when
Heat Set is flashing. To change the cooling setting, tap the UP or DOWN arrow to
change the setting when Cool Set is flashing. The thermostat will return to its
operating mode in 10 seconds and the new temperature(s) will be displayed.
Cool
Set
11