Premium Leisure Swimmer’s Edge 18 Owner's Manual page 53

WARNING: NEVER use paint solvents, acids, acetone, benzene, lacquer
thinner, tolulene, xylene, or similar chemicals to clean your swim spa shell.
Water Management
Our chemical water purification system is a perfect match for your swim spa.
Depending on usage, the water in your swim spa should be changed every 6-12
months. Upon each change of water it is a good practice to wipe down the swim
spa.
If your water quality seems improper, increasing the time the swim spa filters the
water (see page 32) may clear up your problem.
Below are some answers to common water chemistry questions.
pH
It is common to have pH fluctuations after adding chemicals to your
swim spa or after a party. Let your jets run and give your water time
to stabilize. 9 times out of 10, your pH will come back into the 7.2-
7.8 range on its own.
MILDEW Mildew usually grows in the folds and seams of your cover and then
on cover drips into your swim spa water causing cloudiness and/or odor.
Clean with our special Citra Bright Spray Cleaner and then rinse the
inside of your cover with clean warm water.
Foamy Foam typically results from soap residue on your skin and hair, or
water laundry detergent residue on clothing. Take a soapless shower and
rinse all clothing in warm water prior to bathing.
CLEAR Your "source water" most likely has dissolved heavy metals. When
green or
this is the case, order our special Metal Gon metal remover. Using
brown a pre-filter can remove these contaminants before they get into your
water swim spa (see page 25).
CLOUDY Algae can be resolved by adding a respected brand of algaecide.
green
water
CLOUDY Although a normal condition immediately after filling that dissipates
white after time, with stabilized water this is a visual indication that the
water
total alkalinity or pH or both are at improper levels. Test your water
weekly and maintain proper water chemistry (see page 30).
ODOR If your water develops an odor and/or cloudiness, clean your cover
and/or and filters and try increasing the amount of time the swim spa filters
CLOUDY per day by turning your filtration cycle time or duration up.
water
HEAVY After a period of heavy use, your swim spa may cloud. Shock your
use swim spa with 2 ounces of non chlorine shock and wait 36 hours.
Page 51
For HELP, call 727.573.9611