Premium Leisure Swimmer’s Edge 18 Owner's Manual page 10

support equipment or structure. Install protective waterproof conduit to
house light, or topside control cables that must be buried. Access for future
service must be considered at the time of design and installation. Difficult
access can result in supplemental service labor charges not covered by the
factory warranty. Consider easily removable deck materials.
7) Assure that your swim spa
delivery route will accommodate its large size. In most cases, a crane will be
necessary for the delivery.
8) Provide adequate ventilation for the humidity created by your swim spa. In
most cases, a Swim spa Hard Cover is sufficient.
9) Protect the pumps (and/or turbine) and all equipment from the weather by
ensuring the cabinet panels are secure at all times.
10) Allow 36 inches (1 meter) of unobstructed access to all sides of your
spa for normal servicing.
11) Contact your local building code department to determine if a building permit
is necessary and for information on applicable bylaws (distance from
property lines, buildings, fencing requirements, etc). In most cases, the
shallow depth of the unit could result in it being classified as a portable swim
spa by building regulations (as opposed to a permanent pool).
12) Consider positioning your
the wind. Just as people can get cold on cool/windy days, so can your swim
spa. Windy environments can significantly increase operating costs.
Figure 3 – A Crane is a Common Delivery Arrangement for Swim Spas
will fit into the space you have chosen and the
swim spa out of or adequately protecting it from
Page 8
For HELP, call 727.573.9611
swim