Smart Winter Mode
If the system (sensor located inside heater) detects ambient conditions
below 44ºF/6.7ºC, it automatically enters the Smart Winter Mode for
period of four minutes after it detects the swim spa temperature has
risen to 45ºF/7.2ºC.
Programming Summary
Figure 24 – VL600S Programming Summary
NOTE FOR ALL DOMESTIC SWIM SIDE (MVP 260) TOPSIDE CONTROLS:
Follow the above steps to set the filter cycle and water temperature.
To set the operating modes, follow the steps above except instead of
pressing "Mode" – press "LIGHT."
Page 35
For HELP, call 727.573.9611