Table of Contents
Advertisement
V I I .
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Push down on the seat lock lever to unlock the seat.
See figure 15.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely
in place.
ARMREST WIDTH ADJUSTMENT
The Hurricane armrest width can be adjusted inward or
outward.
1. Loosen the armrest adjustment knobs at the back of
the seat frame. See figure 16.
2. Slide the armrest uprights in or out to the desired width.
3. Tighten the armrest adjustment knobs.
The armrests can also be lifted upward to allow getting
on and off of your Hurricane easier.
ARMREST HEIGHT ADJUSTMENT
Refer to figure 16 when adjusting the armrest height.
Required tools:
• 5/32-in. Hex Key
Spanner
1. Loosen the setscrew on the side of the height adjust-
ment tube with the 1/8-in. hex key. See figure 16.
2. Loosen and remove the acorn nut and screw holding
the height adjustment tube in place.
3. Raise or lower the height adjustment tube to the de-
sired height.
4. Align the holes in the adjustment tube with the holes
in the armrest upright.
5. Insert the screw through the holes in both the height
adjustment tube and the armrest upright.
6. Install and tighten the acorn nut.
7. Tighten the setscrew on the side of the height adjust-
ment tube.
8. Repeat for the other armrest.
Hurricane
C O M F O R T A D J U S T M E N T S
•1/8-in. Hex Key
• 7/16-in.
FRONT-TO-BACK SEAT RELEASE LEVER
ARMREST ADJUSTMENT KNOBS
FIGURE 15. SEAT ADJUSTMENTS
HEIGHT ADJUSTMENT TUBE
SETSCREW
ACORN NUT
ARMREST UPRIGHT
ARMREST ADJUSTMENT
KNOB
FIGURE 16. ARMREST ADJUSTMENTS
SEAT LOCK LEVER
31
Advertisement
Table of Contents
