Sensor Setup - AMX NXD-CV5 Operation/Reference Manual

Firmware Pages and Descriptions
G4 Web Control Page Elements (Cont.)
G4 Web Control Settings
(Cont.):
Web Control Port
Maximum Number of
Connections
Current Connection Count
G4 Web Control Timeout:
FIG. 69 Sample relationship between G4 Web Control and Mange WebControl Connections window
Refer to the Using G4 Web Control to Interact with a G4 Panel section on page 47 for more detailed
instructions on how to use the G4 Web Control page with the new web-based NetLinx Security
application.

Sensor Setup

The Sensor Setup page (FIG. 70) allows you to adjust the Light and Motion Sensor parameters on a
Modero touch panel.
FIG. 70 Sensor Setup page
78
Allows you to enter the port value that the VNC Web Server runs on.
• Default value is 5900.
This read-only field displays the maximum number of users that can be
simultaneously connected to the target panel via the web.
• Default value is 1.
This read-only field displays the current number of users connected to the
target panel via the web. This value cannot exceed the Maximum number field.
Sets the length of time (in minutes) the panel can remain idle (no cursor
movements) before the session is closed and the user is disconnected.
• Minimum value = 0 minutes (panel never times-out)
• Maximum value = 240 minutes (panel times-out after 240 minutes/4hours)
5" Modero Widescreen Touch Panel