Connecting Cables To The Monitor - Fujitsu AMILO LXL 3220W Operating Manual

Getting started

Connecting cables to the monitor

The monitor ports are protected by a cover.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1 = Power connector
2 = AUDIO-IN socket
3 = HDMI socket
► Remove the cover.
► Select the data cable which is suitable for your computer.
► Insert the data cable connector into the D-SUB socket (5) of the monitor.
Alternatively, select one of the other data cables and secure the socket
connection by tightening the retention screws.
► Insert one connector of the audio line in the AUDIO IN (2) socket on the
monitor and make sure it is properly engaged.
► Plug the power cable supplied into the power socket (1) of the monitor.
► Secure the cover over the connections.
A lock (Kensington Lock) can be mounted in the security slot to protect the monitor
from theft. A Kensington Lock is not included with the monitor at delivery.
12
1
6
2 3 4 5
4 = DVI-D socket (DVI)
5 = D-SUB socket (VGA)
6 = Security slot for the "Kensington Lock"
A26361-K1300-Z120-1-7619, edition 2