Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Fujitsu P27T-7
Summary of Contents for Fujitsu P27T-7
- Page 1 Display Operating Manual P27T-7 LED...
- Page 2 For automatic driver updates, go to: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: • our Hotline/Service Desk (see the Service Desk list or visit: "http://support.ts.fujitsu.com/contact/servicedesk") • Your sales partner • Your sales office We hope you enjoy working with your new Fujitsu system!
- Page 4 Published by Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 (Mies-van-der-Rohe Street No. 8) 80807 Munich, Germany Contact http://fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2012. All rights reserved. Publication Date 10/2012 Order No.: A26361-K1442-Z320-1-7619, edition 1...
-
Page 5: Table Of Contents
P27T-7 LED Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Explanatory information about standard ISO 9241-307 Technical specification... - Page 6 Remarks Notes on the product description meet the design requirements of Fujitsu and are provided for the purposes of comparison. The actual results may differ due to several factors. Subject to technical changes without prior notification. Fujitsu accepts no responsibility for technical or editorial mistakes or omissions.
- Page 7 HDMI port ................36 Fujitsu...
- Page 8 Contents Fujitsu...
-
Page 9: Your Lcd Screen
You don’t need to be an "expert" to perform the operations described here. Nonetheless, it is important to always observe the safety notes given in the operating instructions for the computer and in this manual. In the event of any problems, please contact your sales office or our Service Desk. Fujitsu... -
Page 10: Further Information
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://fujitsu.com/fts/" • Names of CDs, DVDs and titles or designations of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" Manual indicates a button on the monitor, e.g:... -
Page 11: Important Notes
31. Otherwise you may damage the device. If you are in any doubt, contact your sales outlet or our Help Desk. Use a screen saver with moving images and activate the power management for • your monitor to prevent still images from "burning in". Fujitsu... -
Page 12: Power Cable
If the device is brought from a cold environment into the room where it will be used, condensation may occur. Before operating the device, wait until it is absolutely dry and has reached approximately the same temperature as the installation site. Fujitsu... -
Page 13: Cleaning The Device
2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive" and 2009/125/EC "Ecodesign Directive". Power management The Fujitsu LCD monitor is equipped with a power management system which reduces the power draw in 0 W energy saving mode to less than 0 W (for VGA and DVI). Fujitsu... -
Page 14: Disposal And Recycling
"http://fujitsu.com/fts/remarketing" "http://www.recupel.be" "http://www.swico.ch" Asia Taiwan: Fujitsu America, Inc. Environmental Protection 1250E. Arques Avenue Administration Sunnyvale, CA 94085 U.S.A. Executive Yuan R.O.C. Phone No.: (408) 746-6000 "http://recycle.epa.gov.tw" More information on this subject can be found on the Internet at "http://fujitsu.com/fts/recycling". Fujitsu... -
Page 15: Getting Started
► Should you discover that the delivery does not correspond to the delivery note, notify your local sales outlet immediately. Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device. Fujitsu... -
Page 16: Setting Up The Device
To ensure sufficient ventilation, the air inlet and outlet openings of the device must be kept clear. Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). Fujitsu... - Page 17 Depending on the situation, it may be advisable to use a swivel arm or a similar accessory (VESA FPMPMI), which are available from specialist dealers. For this purpose the monitor base must be removed beforehand as described in chapter "Removing monitor base", Page Fujitsu...
-
Page 18: Adjusting Height
The inclination of the monitor can be adjusted by -3° (forward) and +35° (backwards) from its vertical position. ► Hold the monitor with both hands on the left and right sides of the casing and move it to the desired angle. Fujitsu... -
Page 19: Removing Monitor Base
You can now mount a swivel arm or a similar accessory in accordance with VESA FPMPMI using a hole spacing of 100 mm. For instructions on how to mount the swivel arm or a similar accessory, please see the documentation for the swivel arm or similar accessory. Fujitsu... -
Page 20: Connecting The Device
► Select the appropriate data cable for your computer. ► Connect one of the connectors of the data cable to the DVI-D socket or the DP socket of the monitor and secure the DVI-D connection by tightening the safety screws. Fujitsu... -
Page 21: Connecting Cables To The Computer
► Plug the power connector of the computer into a properly grounded mains outlet. If your computer has two monitor ports ("onboard" screen controller and separate graphics card), the monitor port for the separate graphics card is active as standard. Fujitsu... -
Page 22: Operation
BASIC energy saving mode <1 W. This position is required only for the DP data cable, but can also be necessary for VGA or DVI on some PCs if the monitor remains dark in 0 W operating mode. ► Switch the device on with the On/Off touch sensor (1). Fujitsu... -
Page 23: Notes On Power Management
BASIC power-saving mode are the preset factory defaults. Once an input is made at the computer the screen contents are restored. For detailed information on how energy-saving mode operates, please refer to the operating manual or technical manual of the computer. Fujitsu... -
Page 24: Changing The Monitor Settings
OSD. Performing auto-adjustment of the monitor ► Touch the AUTO sensor for about 1 second. The Auto Processing message appears. Picture quality and position are set to optimum values for your system. Fujitsu... -
Page 25: Locking The Osd Menu
The message ECO Mode on or ECO Mode off appears. If the ECO operating mode is activated, the following OSD settings are changed: Office Mode 6,500 K Colour reduced Brightness After the ECO operating mode is switched off, the brightness previously set by the user is restored. Fujitsu... -
Page 26: Changing The Monitor Settings Using The Osd Menu
The English menu names are used in the following description (default setting). ► Touch the MENU sensor to activate the OSD menu. The main menu appears, with icons for the setting functions. The first symbol, (Brightness/Contrast), is highlighted and the associated functions are visible in the right-hand menu field. Fujitsu... - Page 27 MENU AUTO sensor to exit the function without making any changes. If you want to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described in the following. Fujitsu...
-
Page 28: Osd Menu Functions
Colour = 7500K, ACR = off) Office presets (the settings for colour and sharpness can be adjusted) Office Photo presets (colour, sharpness, saturation, ACR) Photo Video presets (colour, sharpness, saturation, ACR) Video ACR = Dynamic contrast (on / off) Fujitsu... -
Page 29: Adjusting The Picture Size And Position
In the user-defined setting you can change the colour ratios of the basic colours (red, green, blue) as required. The 6500K and sRGB settings are recommended for general Windows applications. The full colour space of the LCD panel can be used in the Native and Custom Colour settings. Fujitsu... -
Page 30: Setting Functions
If you are using a VGA data cable, an Auto Processing message is displayed. The language selection menu appears. Displaying information Call the Information setting window This function displays the model designation, serial number, resolution, H/V frequency and ECO mode. Fujitsu... -
Page 31: Notes On Ergonomic Colour Adjustment
+ Colour combination very suitable - Colour combination not suitable because colour hues are too close together, thin characters are not identifiable or rigorous focusing is demanded of the human eye. Fujitsu... -
Page 32: Troubleshooting
Picture is shaking ► Check whether the data cable for the monitor is correctly attached to the monitor port on the computer. ► Touch the AUTO sensor to perform auto-adjustment of the screen. Fujitsu... - Page 33 Despite the correct resolution of 2560 x 1440, small fonts are not sharp or are illegible and black font is shown coloured. (The information menu of the monitor shows a resolution of 1280 x 1440). Fujitsu...
-
Page 34: Explanatory Information About Standard Iso 9241-307
The maximum permitted number of faulty pixels is stipulated in the international standard ISO 9241-307. In accordance with standard ISO 9241-3, LCD monitors by Fujitsu comply with Class II for low resolutions and Class I for resolutions of 1680 x 1050 (1764000 pixel) and higher. -
Page 35: Technical Specification
Technical specification Technical specification Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. Product name P27T-7 LED Model name P27T-7 Dimensions and weight Visible diagonals 68.5 cm Dot pitch 0.2331 mm... -
Page 36: Vesa-Ddc-Compatible Vga Interface
60 Hz 1280 x 1024 65.0 kHz 60 Hz 1680 x 1050 74.0 kHz 60 Hz 1920 x 1200 (only VGA, DVI, DP) 80.0 kHz 75 Hz 1280 x 1024 88.7 kHz 60 Hz 2560 x 1440 (only DVI, DP) Fujitsu... -
Page 37: Video/Tv Operating Modes Using Dp And Hdmi
16:9 SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock Fujitsu... -
Page 38: Dvi-D Port
Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0– TMDS Data0+ TMDS Data 0/5 Shield not connected not connected TMDS Clock Shield TMDS Clock+ TMDS Clock– Fujitsu... -
Page 39: Displayport Socket
Lane 1 (negative) Earth Lane 1 (positive) Lane 0 (negative) Earth Lane 0 (positive) Connected to earth Connected to earth Auxiliary channel (positive) Earth Auxiliary channel (negative) Hot Plug Detect Return for Power Power for connector (3.3 V 500 mA) Fujitsu... -
Page 40: Hdmi Port
HDMI port Meaning TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect Fujitsu...