Connecting The Device; Connecting Cables To The Monitor - Fujitsu B27-9 TE QHD Operating Manual

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.

Connecting cables to the monitor

The supplied data cable has two 20-pin DP connectors for connection to
the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1
1 = Power connector
2 = DVI-D connector
3 = HDMI socket
4 = Display port socket
5 = AUDIO-IN socket
► Select the appropriate data cable for your computer.
Fujitsu
10
2 3
"Important notes", Page
4 5 6
6 = AUDIO-OUT socket
7 = USB 3.1 Gen1 (5Gbps, upstream)
8 = USB 3.1 Gen1 (5Gbps, downstream)
9 = USB 3.1 Gen1 (5Gbps) type C
10 = Security slot for Security Lock
Getting started
7.
9
8
7 8
17