Getting started
Connecting the device
Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
Connecting cables to the monitor
The monitor ports are protected by a cover.
The data cables supplied have two 15-pin D-SUB connectors or two 24-pin DVI
connectors for connection to the monitor and to the computer.
Information on the computer connections and interfaces is contained in the
operating manual for the computer.
1 = Security slot for "Kensington Lock"
► Remove the cover (2).
► Select the appropriate data cable for your computer.
16
K
1
3
4
5
2 = Cover position
"Important notes", Page
2
6
7
A26361-K1240-Z120-7619, edition 1
3.