Removing Monitor Base; Connecting The Device - Fujitsu AMILO LXL 3220W Operating Manual

Removing monitor base

Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The display surface is susceptible to scratching!
For instructions on how to mount the swivel arm or wall bracket, please see
the documentation for the swivel arm or wall bracket.

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.
A26361-K1300-Z120-1-7619, edition 2
► Switch off the monitor and pull the power
► Lay the monitor on its face on a soft surface.
► Remove the cover and disconnect all cables.
► Remove the screws (1) on the rear
1
1
"Important notes", Page
plug out of the power socket.
of the monitor.
You can now mount a swivel arm or
a wall bracket as per VESA FPMPMI
with 100 mm hole spacing.
Getting started
3.
11