Vesa-Ddc-Compatible Vga Interface; Preset Operating Modes; Most Frequent Operating Modes; Video/Tv Operating Modes Using Dvi And Hdmi - Fujitsu AMILO LXL 3220W Operating Manual

VESA-DDC-compatible VGA interface

Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications
interface between the monitor and the computer. If the computer is equipped with a
VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring
optimum operation from the monitor and select the appropriate settings.

Preset operating modes

The picture position and size have been optimised at the factory for the operating
modes listed above. Depending on the graphics card used, it may be necessary
to adjust the display position or size. In this case you can change and save the
settings (see chapter
For ergonomic reasons, a screen resolution of 1680 x 1050 pixels is recommended.
Because of the technology used (active matrix), an LCD monitor provides a
totally flicker-free picture, even with a refresh rate of 60 Hz.

Most frequent operating modes

Horizontal frequency
31.5 kHz
31.5 kHz
37.5 kHz
37.9 kHz
46.9 kHz
48.4 kHz
60.0 kHz
65.0 kHz

Video/TV operating modes using DVI and HDMI

Screen resolution
720 x 480 i *
720 x 480 p
720 x 576 i *
720 x 576 p
1280 x 720 p
1920 x 1080 i
1920 x 1080 p
* Only possible with HDMI
A26361-K1300-Z120-1-7619, edition 2
"Changing the monitor settings", Page
Refresh rate
70 Hz
60 Hz
75 Hz
60 Hz
75 Hz
60 Hz
75 Hz
60 Hz
Refresh rate
60 Hz
60 Hz
50 Hz
50 Hz
50 / 60 Hz
50 / 60 Hz
50 / 60 Hz
Technical data
15).
Screen resolution
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1680 x 1050
Aspect ratio
4:3 / 16:9
4:3 / 16:9
4:3 / 16:9
4:3 / 16:9
16:9
16:9
16:9
27