Changing The Monitor Settings With The Buttons Of The Control Panel - Fujitsu AMILO LXL 3220W Operating Manual

Operation
Changing the monitor settings with the buttons
of the control panel
The buttons of the control panel have two functions. With the OSD menu not
activated, you can make the following settings directly:
SELECT | MENU
1 = SELECT / MENU button
2 = Forwards / ECO button
3 = Power indicator/ON/OFF switch
Performing auto-adjustment of the monitor
► Press the EXIT / AUTO
The Auto Processing message appears
Picture quality and position are set to optimum values for your system.
Selecting input signal (D-SUB/DVI-D/HDMI)
► Press the Back /
► Press the Forwards / ECO button or the Back /
desired monitor connection (VGA, DVI or HDMI).
This setting window can also be called up when the OSD menu is locked.
16
| ECO
1 2
button for about 1 second.
INPUT button to call up the Input selectsetting window.
| INPUT
3 4
4 = Back / INPUT button
5 = EXIT / AUTO button
INPUT button to select the
A26361-K1300-Z120-1-7619, edition 2
EXIT | AUTO
5