Connecting Cables To The Monitor - Fujitsu P2410 Series Operating Manual

Connecting cables to the monitor

The data cables supplied have two 20-pin DP plugs or two 20-pin USB plugs for
connection to the monitor and to the computer.
Refer to the operating manual for the computer for information on the computer's ports and interfaces.
► Select the appropriate data cable for your computer.
► P series: Plug a data cable connector to the USB-C, HDMI or Display port socket on the monitor.
B Series: Plug a data cable connector to the HDMI, Display port, DVI
or VGA socket on the monitor.
The monitor automatically detects the input when only one signal source is connected.
A High Speed HDMI cable is needed for connection via HDMI.
► If you are not using the P-series USB-C port, plug the USB 3.0 cable supplied
(USB-A to USB-B) into the USB-B port socket (USB 3.2 Gen1, Upstream) and the
other end of the cable into a USB-A socket on the computer.
► Plug the network cable supplied into the socket on the monitor.
A lock (Security Lock) can be mounted in the security slot to protect the monitor
against theft. A Security Lock is not included with the monitor at delivery.
Fujitsu
Getting started
19