Connecting The Device; Connecting Cables To The Monitor - Fujitsu P27-9TQ Operating Manual

Connecting the device

Please observe the safety information in
CE conformance and optimum picture quality are guaranteed only if
you use the data cables supplied.
► Switch off the monitor and the computer.
► Disconnect the power plug from the computer.

Connecting cables to the monitor

The data cables supplied have two 20-pin DP plugs or two 20-pin USB plugs for
connection to the monitor and to the computer.
Refer to the operating manual for the computer for information on the computer's ports and interfaces.
1
1 = Power connection
2 = HDMI port
3 = Display port IN socket
4 = Display port OUT socket (Daisy Chain)
5 = Audio OUT socket
6 = USB-C port (USB 3.1 Gen1, Upstream)
► Select the appropriate data cable for your computer.
Fujitsu
10
2 3 4
"Important notes", Page
5 6 7
7 = USB-B port (USB 3.1 Gen1, Upstream)
8 = USB-A port (USB 3.1 Gen1, Downstream)
9 = Network port (RJ45, Gigabit Ethernet)
10 = Security slot for Security Lock
11 = USB-A port (USB 3.1 Gen1, Downstream)
12 = USB-C port (USB 3.1 Gen1, Downstream)
Getting started
7.
12
11
8 9
17