Fujitsu AMILO LXL 3220W Operating Manual

Fujitsu AMILO LXL 3220W Operating Manual

Amilo lxl 3220w consumer monitor

Advertisement

Consumer Monitor
English
Operating Manual
AMILO LXL 3220W

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu AMILO LXL 3220W

  • Page 1 Consumer Monitor English Operating Manual AMILO LXL 3220W...
  • Page 2 Are there ..any technical problems or other questions that you would like help with? Please contact: • our Hotline/Help Desk (refer to the enclosed Help Desk List or go to: "www.fujitsu-siemens.com/support/") • your sales partner • your sales office The latest information on our products, tips, updates etc.
  • Page 4 This manual was produced byXerox Global Services Published by Fujitsu Siemens Computers GmbH AG09/08 Edition2 Order no.: A26361-K1300-Z120-1-7619...
  • Page 5: Table Of Contents

    AMILO LXL 3220W Operating Manual Your LCD screen... Important notes Getting started Operation Notes on ergonomic colour adjustment Troubleshooting Notes regarding the DIN EN ISO 13406-2 standard Technical data...
  • Page 6 VESA, DDC and DPMS are registered trademarks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH2008 All rights reserved, including in particular rights of translation, reproduction by printing, copying or similar methods, in part or in whole. Non-compliance is subject to compensation for damages.
  • Page 7 Contents Contents Your LCD screen............... . Target group .
  • Page 8 Contents HDMI port ................30 A26361-K1300-Z120-1-7619, edition 2...
  • Page 9: Your Lcd Screen

    Your LCD screen... Your LCD screen... has a whole range of useful features and functions, e.g.: • TFT display (Thin Film Transistor; active matrix) minimal space requirements thanks to slim casing • • optimum ergonomic characteristics (totally distortion-free, excellent picture definition and colour purity right into the corners) •...
  • Page 10: Notational Conventions

    • cross-references to an external source, e.g. a web address: For more information, go to "www.fujitsu-siemens.com" • indicates names of CDs and DVDs as well as names and titles of other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety" manual refers to a key on the keyboard, e.g.:...
  • Page 11: Important Notes

    Important notes Important notes Importantnotes Notes In this chapter you will find information regarding safety which it is essential to take note of when working with your device. Safety instructions This device complies with the relevant safety regulations for data processing equipment, including electronic office machines for use in an office environment.
  • Page 12: Power Cable

    Important notes • The device may only be operated in the wide format (0° landscape mode). The buttons of the control panel are located at the bottom in the middle of the monitor. • Store this manual close to the device. If you pass the device on to third parties, you should pass this manual on with it.
  • Page 13: Ce Marking

    These savings could also prevent the emission of 20 million tons of carbon dioxide into the atmosphere - equivalent to the discharge from 5 million cars. As an Energy Star Partner, Fujitsu Siemens Computers GmbH has determined that this product meets the Energy Star guidelines for energy efficiency.
  • Page 14: Disposal And Recycling

    Fujitsu Siemens Computers Inc. Protection Administration 1250E. Arques Avenue Executive Yuan R.O.C. Sunnyvale, CA 94085 U.S.A. "http://recycle.epa.gov.tw" Contact: Schroettle-Henning, Bernd Phone No.: (408) 834-0306 Fax No.: (408) 746-8299 For more information on this subject, please go to "www.fujitsu-siemens.com/recycling". A26361-K1300-Z120-1-7619, edition 2...
  • Page 15: Getting Started

    Getting started Getting started Unpacking and checking the delivery The display surface of the device is sensitive to pressure and scratches. Always hold the device by the casing! The complete device package includes: • one monitor • one data cable (D-SUB) •...
  • Page 16: Setting Up An Ergonomic Video Workstation

    Getting started Setting up an ergonomic video workstation ► Do not position the video workstation opposite a window (1). ► Position the monitor outside the reach of a light source (1). ► Position the keyboard where it is easiest to reach (1). A26361-K1300-Z120-1-7619, edition 2...
  • Page 17 Getting started ► Position the monitor so that the eye distance to the screen (1) is around 50 cm. 50 cm ► Position the monitor for optimum viewing (1). The monitor should under no circumstances fall outside the permissible viewing space (2). Depending on the situation, it may be advisable to use a swivel arm or wall bracket (VESA FPMPMI), which are available from specialist dealers.
  • Page 18: Mounting Monitor Base

    Getting started Mounting monitor base ► Fit the lower part of the monitor base onto the monitor and allow it to engage. Adjusting the inclination The inclination of the monitor can be adjusted by -5° (forward) and +20° (backwards) from its vertical position. ►...
  • Page 19: Removing Monitor Base

    Getting started Removing monitor base Before you can use a swivel arm or a wall bracket, you must remove the monitor base. The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the power socket. ►...
  • Page 20: Connecting Cables To The Monitor

    Getting started Connecting cables to the monitor The monitor ports are protected by a cover. Information on the computer connections and interfaces is contained in the operating manual for the computer. 1 = Power connector 4 = DVI-D socket (DVI) 2 = AUDIO-IN socket 5 = D-SUB socket (VGA) 3 = HDMI socket...
  • Page 21: Connecting Cables To The Computer

    Getting started Connecting cables to the computer Information on the computer connections and interfaces is contained in the operating manual for your computer. ► Connect the data cable to the (active) monitor port on the computer and secure the plug-in connection by tightening the safety screws. ►...
  • Page 22: Operation

    Operation Operation Switching the device on and off The ON/OFF switch on the front of the monitor is used for switching the monitor on and off. 1 = Power indicator/ON/OFF switch Press the buttons from the bottom up. The colour of the LED indicator changes as follows: LED indicator Status blue...
  • Page 23: Notes On Power Management

    Operation Notes on power management If your computer is equipped with power management (power-saving mode), the monitor can fully support this function. Here the monitor does not distinguish between the individual energy-saving modes of the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately switching into the mode with the highest energy-saving effect.
  • Page 24: Changing The Monitor Settings With The Buttons Of The Control Panel

    Operation Changing the monitor settings with the buttons of the control panel The buttons of the control panel have two functions. With the OSD menu not activated, you can make the following settings directly: SELECT | MENU | ECO | INPUT EXIT | AUTO 1 = SELECT / MENU button 4 = Back / INPUT button...
  • Page 25: Changing The Monitor Settings Using The Osd Menu

    Operation Activate/deactivate ECO operating mode The power consumption of the device can be decreased by reducing the brightness of the picture. ► Press the Forwards / ECO button to switch the ECO operating mode on or off. The message Action was executed appears. Office Mode 6500K...
  • Page 26 Operation The OSD menu is available in various languages. The English menu names are used in the following description (default setting). You can select another language using the OSD Language function in the OSD Setup menu. ► Press the button to SELECT/MENU activate the OSD menu.
  • Page 27: Adjusting The Brightness And Contrast

    Operation If you want to change other settings, select the corresponding function from the OSD main menu. All possible adjustments of the main menu are described in the following. Adjusting the brightness and contrast Call up the Brightness/Contrast setting window Set the brightness of the display Brightness With this function you change the brightness of the background lighting.
  • Page 28: Adjusting The Picture Size And Position

    Operation Adjusting the picture size and position Call the Image adjust setting window Eliminate picture disturbance Phase With this function you fine-tune your monitor to eliminate picture disturbance. Set synchronisation Clock With this function you adjust the picture width to eliminate vertical picture disturbances.
  • Page 29: Setting Functions

    Operation Setting functions Call up the Setup settings window Select the input signal Input select This function is used to select the input signal (VGA, DVI or HDMI). This is on condition that the display adapter supports this function. Set the language for the OSD menu Language With this function you select the language for the OSD menu.
  • Page 30: Notes On Ergonomic Colour Adjustment

    Notes on ergonomic colour adjustment Notes on ergonomic colour adjustment If you select colours for the monitor in your application programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not suitable for continuous text and data entry.
  • Page 31: Troubleshooting

    Troubleshooting Troubleshooting Should an error occur, first check the following points. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the problem, please inform our help desk. Having this problem? Check the following points: No screen display...
  • Page 32 Troubleshooting Having this problem? Check the following points: Picture disturbances (horizontal lines, picture ► Press the EXIT / AUTO button to perform noise) auto-adjustment of the screen. The screen becomes darker The background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be replaced.
  • Page 33: Notes Regarding The Din En Iso 13406-2 Standard

    Notes regarding the DIN EN ISO 13406-2 standard Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production techniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in the international standard ISO 13406-2 (Class II).
  • Page 34: Technical Data

    Technical data Technical data Condensation is not permitted, neither in the rated range of operation nor in the limit range of operation. LXL 3220W Dimensions and weight Visible diagonals 56 cm Dot pitch 0.282 mm Image size Width 473.8 mm Height 296.1 mm Maximum resolution...
  • Page 35: Vesa-Ddc-Compatible Vga Interface

    Technical data VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video Electronics Standard Association, Display Data Channel) is used as the communications interface between the monitor and the computer. If the computer is equipped with a VESA-DDC-compatible VGA interface, it can automatically read the data for ensuring optimum operation from the monitor and select the appropriate settings.
  • Page 36: Sub D Port

    Technical data SUB D port Meaning Video input red Video input green Video input blue Ground Ground Video ground red Video ground green Video ground blue +5 V (DDC) Sync. ground Ground DDC Data H. sync V. sync DDC Clock A26361-K1300-Z120-1-7619, edition 2...
  • Page 37: Dvi-D Port

    Technical data DVI-D port Meaning TMDS Data2– TMDS Data2+ TMDS Data 2/4 Shield not connected not connected DDC Clock DDC Data Analog Vertical Sync TMDS Data1– TMDS Data1+ TMDS Data 1/3 Shield not connected not connected +5V Power Earth Hot Plug Detect TMDS Data0–...
  • Page 38: Hdmi Port

    Technical data HDMI port Meaning TMDS Data2+ TMDS Data2 Shield TMDS Data2– TMDS Data1+ TMDS Data1 Shield TMDS Data1– TMDS Data0+ TMDS Data0 Shield TMDS Data0– TMDS Clock+ TMDS Clock Shield TMDS Clock– N.C. DDC/CEC Ground +5 V Power Hot plug detect A26361-K1300-Z120-1-7619, edition 2...

Table of Contents