Switching Off; Emptying The Water Tank - V-ZUG Combi-Steam XSL Operating Instructions Manual

3.8

Switching off

Press the button.
➤
– The and
– For all operating modes that use steam, steam can be released at the
end of the cooking process.
– The steam is gradually released from the cooking space – this take
around 1 minute – so that there is no sudden rush of steam when the
appliance door is opened.
– The cooling fan can continue to run.
– «Residual heat» appears in the plain text display.
When the symbols are no longer illuminated and the plain text display
is dark the appliance is off.
Any condensate or food in the cooking space – after each cooking session
➤
with steam – must be dried completely or removed.
To prevent corrosion, leave the appliance door open in the at-rest position
➤
until the cooking space has cooled down.
3.9

Emptying the water tank

The water in the water tank can be hot. Scalding hazard!
When the appliance is switched off, the residual water is pumped back into
the water tank.
i
– « Water is being pumped off» appears in the plain text display.
When the water has been pumped back, remove, empty and then dry the
➤
water tank.
i
If « Do not remove water tank» is displayed in the plain text display,
then the temperature of the residual water is still over 80 °C. For
safety reasons, the residual water is not pumped back until its temper-
ature drops below the 80 °C mark.
Any operating mode can be started again at any time.
symbols go out.
3 Operating the appliance
25