BMW M5 Owner's Handbook Manual page 44

> With Business navigation system, interrupt-
ing spoken instructions during an
announcement: press the button.
MDrive
MDrive enables you to configure several indi-
vidual settings for your vehicle on the control
display and simultaneously activate them via
the button on the steering wheel.
Configuring setting
With the ignition key in position 2, you can
adjust the MDrive settings on the control
display.
iDrive, operating principle, see page 14.
1. Press the button.
The start menu is called up.
2. Press the controller to call up the menu.
3. Select "Vehicle settings" and press the
controller.
4. If necessary move the controller forwards
until the marker is in the upper section. Turn
the controller until "MDrive" is selected and
press the controller.
Online Edition for Part-No. 01 41 0 159 168 © 03/05 BMW AG
The functions covered by MDrive are dis-
played:
> "SMG Drivelogic"
Sequential M Gearbox with Drivelogic:
Gearshift modes and Drivelogic driving
programs, see page
> "EDC"
Programs for Electronic Damping Con-
trol, see page 70
> "DSC"
Dynamic Stability Control and
M Dynamic Mode, see page
> "POWER"
Programs for M Engine Dynamic Con-
trol, see page 52
> "Active seat back"
Programs for active backrest width
adjustment, see page
> "Head-Up Display"
Views of the Head-Up Display, see
page 74
You can reset all settings for MDrive to their
default settings:
> "Reset to default"
5. Select the desired function.
6. Press controller.
50
68
*
36
*
43