Lucent Technologies 6402 User Manual page 20

Priority Calling
The Priority Calling feature allows you to place an internal call with a
distinctive ring (usually a 3-burst ring) to indicate your call requires
immediate attention.
To place a priority call
1. Press
Feature
Priority Calling feature is administered
OR, dial the Priority Calling access code __________
(while off-hook).
2. Dial the extension and wait for the called party to answer.
To change a regular call into a priority call (when you hear a call
waiting ringback tone)
1. Press
Feature
Priority Calling feature is administered.
2. Wait for the called party to answer.
Note: If you still receive a call waiting ringback tone, wait a few
minutes and try again.
Send All Calls
The Send All Calls temporarily sends all your calls to the extension of a
person designated by your system manager to answer them when you
cannot (perhaps a secretary or receptionist).
To send all calls (except priority calls) immediately to coverage (if
your system manager has provided a coverage path for your
extension)
1. Press
Feature
Send All Calls feature is administered
OR, dial the Send All Calls access code __________
(while off-hook).
Note: When a call comes to your extension, the call activity light will
flash and you may hear a ring-ping tone (half ring) indicating
that the call has been sent to coverage.
To cancel Send All Calls
1. Press
Feature
the Send All Calls feature is administered
OR, dial the Send All Calls cancel code __________
(while off-hook).
(while off-hook), then the dial pad key on which the
[dial tone]
[ringback tone]
again, then press the dial pad key on which the
(while on-hook), then the dial pad key on which the
[confirmation tone]
again (while on-hook), then the dial pad key on which
[confirmation tone]
16