Lucent Technologies 6402 User Manual page 15

Abbreviated Dialing (AD)
To place an AD call from your Feature Directory
1. While off-hook, press
corresponds with the AD number you wish to call.
For example, to call the number stored as AD entry F3, press
, then press the
Feature
To program or reprogram a Personal List item
1. On a separate sheet of paper, write down the outside numbers,
extensions, and/or feature access codes you want to program as
items on your Personal List(s).
Note: Each phone number or feature access code is stored as a
separate item.
2. While off-hook, dial the Abbreviated Dialing Program access
code _______.
3. Dial the Personal List number (1, 2, or 3).
4. Dial the list item (1, 2, 3...). (See you system manager for the number
of Personal List items you can program.)
5. Dial the number you want to store (up to 24 digits).
Note: If you are programming an outside number, be sure to include
a trunk code, if applicable.
6. Press .
#
Number is stored.
7. Repeat Steps 4 through 6 if you want to program additional items on
the same list. Hang up and begin again at Step 1 if you want to
program items on another personal list.
8. Hang up.
9. Record your personal list items on the Abbreviated Dialing list on the
appropriate card in the tray under the base of the telephone.
To place a call using an AD list button or code
1. Press
Feature
access code is administered.
OR, dial the appropriate AD List code:
List 1 __________
List 2 __________
List 3 __________
(continued)
Feature
dial pad key.
3
[dial tone]
[confirmation tone, then dial tone]
, then the appropriate dial pad key on which a list
11
, then the dial pad key which
[dial tone]
[dial tone]
[ringback tone]
continued on next page