Getting Messages; Selecting A Personalized Ring - Lucent Technologies 6402 User Manual

Getting Messages

Message
Your Message light goes on when a caller has left a message for you.
For directions on retrieving your messages, see your system manager.

Selecting a Personalized Ring

Select Ring
The Select Ring feature allows you to choose your own personalized
ringing pattern for your telephone from among eight different patterns.
To select a personalized ringing pattern
1. While on-hook, press
Current ringing pattern plays and repeats every three seconds.
2. Continue to press (and then release)
eight ringing patterns.
3. If you want to save the ringing pattern currently being played, do not
press
two more times, and then it will be automatically saved.
You hear confirmation tone (two rising tones) and your new ringing
pattern is set.
Note: If you go off-hook, receive a call, or lose power while selecting a
ringing pattern, the process is interrupted and you must start again.
Conf
anymore. You will hear the selected ringing pattern
Conf
.
to cycle through all
Conf
8