Kenmore 796.8051 Service Manual page 30

CONTROL PANEL ASSEMBLY
WARNING !
When you disassemble the control panel,
besure to take gloves and careful panel frame's
edge. Failure to do so can cause serious injury.
1. Remove 2 screws on the control panel
frame.
2. Disconnect the connectors.
3. Pull the control panel assembly upward
and then forward.
4. Remove 9 screws on the PWB
PCB)assembly, display.
5. Remove 4 screws on the
PWB(PCB)assembly, main.
6. Disassemble the control panel
assembly.
29