The Washing Results And Drying Results Are Not Satisfactory - Westinghouse WSU6603 User Manual

If the display shows an alarm code, not de-
scribed in the chart, contact your Customer
Care Centre.
When you contact the Customer Care Cen-
tre you will need to give some details of the

The washing results and drying results are not satisfactory

Problem
The dishes are not clean.
There are streaks, milky stains,
or a bluish layer on glasses and
dishes.
Dry water drop stains on
glasses and dishes.
The dishes are wet and dull.
The dishes are wet.
appliance that can be found on the rating
plate (e.g. model number, serial number,
product number). We recommend that you
record these details.
Possible cause
The selected washing program
was not suitable for the type of
load and soil.
The baskets were not loaded
correctly, water did not touch
all surfaces.
The spray arms could not turn
freely because of incorrect ar-
rangement of the load.
The filters are dirty or not as-
sembled and installed correctly.
The quantity of detergent was
not sufficient or missing.
Rinse aid dosage is too high.
Rinse aid dosage is too low.
The detergent can be the
cause.
The rinse aid dispenser is emp-
ty.
You have set a washing pro-
gram without drying phase or
with a decreased drying phase.
westinghouse 15
Possible solution
Make sure that the washing
program is suitable for the type
of load and soil.
Load the baskets correctly.
Make sure that an incorrect ar-
rangement of the load does not
cause a blockage of the spray
arms.
Make sure that the filters are
clean and correctly assembled
and installed.
Make sure that the quantity of
detergent is sufficient.
Decrease the rinse aid dosage.
Increase the rinse aid dosage.
Use a different brand of deter-
gent.
Fill the rinse aid dispenser with
rinse aid.
Leave the door ajar for some
minutes before you remove the
dishes.