Westinghouse WSU6603 User Manual page 17

Adhesive steam protection foil
Fit the steam protection on the front part of
the kitchen counter along the entire width.
Adjusting the height of the appliance
1. Remove the adjustable plinth.
2. – To lift the front of the appliance, turn
the two front feet counterclockwise.
– To lift the rear of the appliance, turn
the middle screw counterclockwise.
Adjusting the level of the appliance
A correct adjustment of the level of the ap-
pliance allows the door to close and seal
correctly. .
If the door does not close correctly, loosen
or tighten the adjustable feet to level the ap-
pliance.
After the adjustment of the level of the ap-
pliance, assemble the adjustable plinth on
the appliance.
Installing the appliance under the
kitchen counter or to adjacent units
Warning! To prevent injury or damage,
make sure that the appliance is
installed under and adjacent safe
structures.
Use the brackets to attach the appli-
ance under the kitchen counter or to
the adjacent units.
1. Install the brackets in the slots on the
top of the appliance.
2. Adjust the height and level of the appli-
ance.
3. Use the screws (on the top or on the
side) to install the appliance in position.
Make sure that the screws are tight.
4. Make sure that the bottom of the ad-
justable plinth is aligned with the
ground.
westinghouse 17