Select And Start A Washing Program - Westinghouse WDU903 User Manual

Select and start a washing program

1. Close the appliance door.
2. Press the on/off button.
3. Make sure that the appliance is in setting
mode.
4. Press one of the program buttons. Refer
to the 'Washing programs' chart for pro-
gram details.
– The indicator light of the selected pro-
gram stays on. All other program indi-
cator lights go off.
– The start indicator light flashes.
– The flashing digital display shows the
program duration.
5. Press the start button. The washing pro-
gram starts automatically.
– The start indicator light comes on with
a static light.
The washing program only starts after
you press the start button. Until then it is
possible to modify the settings.
When the washing program operates,
you cannot change the program. Cancel
the washing program. Refer to 'Cancel-
ling a washing program'.
Select and start a washing program with
delay start
1. Press the on/off button.
2. Set a washing program.
3. Press the delay start button until the dis-
play shows the necessary delay start of
the washing program.
4. Press the start button.
– The countdown starts. The display
shows remaining time to the start of the
washing program.
– When the countdown is completed,
the washing program starts automati-
cally.
If you open the door during the count-
down, this will interrupt the countdown.
When you close the door again, the
countdown continues from the point of
interruption.
Cancelling delay start
1. Press and hold at the same time the pro-
gram selection button and the delay start
button until all the program lights come
on.
Release the two buttons, the delay start
has been cancelled.
– When you cancel delay start, you also
cancel the washing program.
2. Set a new washing program.
Warning! Only interrupt or cancel a
washing program if necessary.
Attention! Open the door carefully.
Hot steam and water can escape.
Interrupting a washing program
Open the door.
• The program stops.
Close the door.
• The program continues from the point of
interruption.
Cancelling a washing program
1. Press and hold at the same time the pro-
gram selection button and the delay start
button until all the program lights come
on
2. Release the two buttons, the washing
program has been cancelled.
At this point, you can follow these steps:
1. Switch off the appliance.
2. set a new washing program.
Fill the detergent dispenser with detergent
before you set a new washing program.
End of the washing program
The washing program is complete when:
• The display shows 0.
1. Switch off the appliance.
2. Open the door.
– For better drying results, keep the door
ajar for some minutes before you re-
move the dishes.
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
Turbo dry
Turbo dry consists of a fan that condenses
water vapour from the cabinet, ensuring op-
timum drying performance and avoiding re-
sidual steam recondensing on the dishes as
water droplets.
If you press the on/off button or open the
door during the 20 minutes when turbo dry-
ing is in operation, you will deactivate the de-
vice.
westinghouse 11