Westinghouse WSU6603 User Manual page 18

18 westinghouse
Custom made kick-panel
For integrated appliances and full-stainless-
steel door appliances.
We recommend that you make a custom
made kick-panel that aligns your kitchen
cabinets.
A notched continuous panel is necessary to
prevent door swing interference and to
keep kick-panel alignment with adjacent
units.
1. Cut a notch in the kick-panel sufficient
to let the door swing freely under the
appliance (refer to the chart).
2. Make a check for interference. Open
and close the door slowly. If the door
touches the kick-panel, trim to prevent
interference.
3. Attach the kick-panel to adjacent cabi-
nets so that if service is necessary you
can remove it.