Gold's Gym Preview 1000 User Manual page 18

If a heart rate program is
selected, the target heart
rate setting for the first seg-
ment will be shown in the
flashing Current Segment
column of the matrix. The
target heart rate settings for
the next several segments
will be shown in the columns
to the right. When only three
seconds remain in the first
segment of the program,
both the Current Segment
column and the column to the right will flash and a
series of tones will sound.
When the first segment ends, all target heart rate
settings will move one column to the left. The tar-
get heart rate setting for the second segment will
then be shown in the flashing Current Segment
column.
During both heart rate programs, the console
will regularly compare your heart rate to the target
heart rate setting for the current segment. If your
heart rate is too far below or above the target heart
rate setting, the speed of the walking belt will auto-
matically increase or decrease to bring your heart
rate closer to the target heart rate setting.
If the speed or incline setting is too high or too low
at any time during the program, you can adjust the
setting with the Speed or Incline buttons. However,
when the console compares your heart rate to the
target heart rate setting, the speed of the treadmill
may automatically change to bring your heart rate
closer to the target heart rate setting.
If your pulse is not detected during the program,
the letters "PLS" will flash in the right display and
the speed of the treadmill may automatically de-
crease.
Current
Segment
To stop the program at any time, press the Stop
Column
button. To restart the program, press the Start but-
ton or the Speed increase button. The walking belt
will begin to move at 1 mph. When the console
compares your heart rate to the target heart rate
setting, the speed of the treadmill may automati-
cally change to bring your heart rate closer to the
target heart rate setting.
6. Follow your progress with the displays.
See step 5 on page 14.
7. Turn on the fan if desired.
See step 7 on page 14.
8. When you are finished exercising, remove the
key from the console.
See step 8 on page 14.
18