Control Elements - Fujitsu PRIMERGY RX2520 M1 Operating Manual

The ID card contains various system information, such as the product name,
serial number, order number, MAC addresses and DNS name (in the Japanese
market, only the product name and the serial number).
6.1.2.1

Control elements

On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
NMI NMI button
V
RST Reset button
Pressing the reset button reboots the system.
V
ID ID button
Lights up (blue) on the front and on the rear of the server when the
ID button is pressed. Both ID indicators are synchronized.
RX2520 M1
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
CAUTION!
Do not press! Risk of loss of data! The NMI button may only
be used by service personnel.
CAUTION!
Risk of loss of data!
Operating Manual
Starting up and operation
61