Ch No On; Volume On; Ir Band; Power On Mode - HealthCare Information BedMate II Operation Manual

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL
Ch No Turn On channel. Set will turn on to this channel. Set to 0 to turn on to channel TV was
ON on when turned off. Input Source should be set to TV.
Volume Turn on volume setting. Set to zero to turn on to same volume level when set was turned
On off.

IR Band

Sets IR band to use. See page 27. Selections are:
Off - Band 1 – Band 2 – Band 3 – Band 4
PowerOn Power control settings. Selections are:
Mode
OFF – Mode 1 – Mode 2 – Mode 3
OFF
Mode 1
Mode 2
Mode 3
LED Ctrl Power LED operation. Selections are:
NORMAL – Reverse – OFF-ALL – OFF-BLK
NORMAL
Reverse
OFF-ALL
OFF-BLK

KeyPad Lock

Locks the front panel buttons. Selections are:
Off
Lock 1
Lock 2
¼ inch Sets operating mode of the pillow speaker jack. Selections are:
Pillowspeaker
Zenith – Puff-slip – Visitor Station – GEN4_R5 – GEN4_INTER – Philips
Zenith
Puff-slip
Visitor Station
GEN4_R5
GEN4_INTER
Philips
HealthCare Information, LLC
Normal power on/off operation
Power on with power. Set turns on when power is applied and can only
be turned off by removing power.
Power on with power. Set can be turned off without removing power.
Power on with power only. Sets come on with power and can be turn
off. Power must be removed to turn back on.
Power LED is on when TV is on.
Power LED is on when TV if off
Power LED is always off.
Power LED is always off but blinks when IR remote control is used
or keypad button is pressed.
Off – Lock 1 – Lock 2
All buttons function.
Only POWER button functions.
Only POWER, VOL+, VOL-, CH+ and CH- buttons function.
Pillow speakers sending Zenith digital code.
Sip and Puff device.
HCI Visitor Station
Curbell GEN 4 Pillow Speaker
HCI interactive pillow speaker
Pillow speakers sending Philips digital code.
25