Power On Setting; Osd Time; Timer; Clock Setting - HealthCare Information BedMate II Operation Manual

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL

Osd Time

Timer

PowerOn Settings set will use when set is turned on.
Setup
Set how long the OSD menu is displayed in seconds. Selections are:
10 s – 20 s – 30 s – 40 s – 50 s – 60 s – Always
NOTE: When Always is selected OSD will not time out. The Always settings will remain in
effect until changed or the set is turn off. If the set is turned off the OSD time will
automatically be set to 30 seconds.
Sets date and time related functions.
Clock Sets date and time related functions.
Setting
Time Zone Set for the local time zone. Use left/right arrow buttons to change.
Daylight Turns DST on or off. Use left/right arrow buttons to change. Selections are:
Savings
Time
Setup Sets time in 24 hour format. Time is displayed in 12 hour format. Press
the "ENTER" button to change. Use the left/right arrow buttons to select digit
Time
to set and the up/down arrow buttons to change the digit. Press the "ENTER"
button when done.
Sets date. Press the "ENTER" button to change. Use the left/right arrow
Setup
Date buttons to select digit to set and the up/down arrow buttons to change the digit.
Press the "ENTER" button when done.
Note: The forth digit is the day of the week with day 1 being Monday.
Sleep Sets the amount of time in minutes the TV will turn off in. Selections are:
Timer
Off – 5min – 10min – 15min – 30min – 45min –
60min – 90min – 120min – 180min – 240min
Timer Enables Operation On/Off timer. Set to yes to enable Operation On/Off timers. See
Enable following text to set operation times.
Timer in When on displays Timer information when changing channels.
Ch Info
Operation Start time for set to operate. Sets time in 24 hour format. Press the "ENTER"
On button to change. Use the left/right arrow buttons to select digit to set and the
up/down arrow buttons to change the digit. Press the "ENTER" button when done.
Time
Operation Start time for set to turn off. Sets time in 24 hour format. Press the "ENTER"
Off button to change. Use the left/right arrow buttons to select digit to set and the
up/down arrow buttons to change the digit. Press the "ENTER" button when done.
Time
NOTE: Set will operate normally between On Time and Off Time. Set can not be operated
between Off time and On time. If an attempt is made to operate the set during Off time the
set will turn on for a few seconds and display "Set can not be operated at this time" and
turn off.
To over ride operation time settings turn set on and quickly enter function code "10086"
Input Turn on source. Selections are:
Source
None – TV – AV – S-VIDEO – SD CARD –
Component – HDMI – FM – VGA – USB
Select None to have set turn on to the source it was on when turned off.
HealthCare Information, LLC
On - Off
24