Advanced Setting; Channel Number; In Channel List; Real Channel Display - HealthCare Information BedMate II Operation Manual

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL
Advanced
Setting
When select displays blue back ground if no signal is present. Press the "ENTER" button to
Blue
Back select/un-select.
Signal Selects the signal source. Use the left/right arrow buttons to change. Selections are:
Type
Auto Automatically finds active channels and add them to the channel list. Non-active channels are removed
form the channel list. Make sure "Signal Type" is properly set then press the "ENTER" button to begin
Channel
Search search.
CH Turns channel roll On or Off. When On the auxiliary inputs such as VGA will be included in the channel
Roll line up. The auxiliary inputs can be selected by using the channel up/down buttons between the highest
and lowest channels. Example: if you are on channel 2 and press the channel down button USB input will
be selected.
Power Turns Power Roll on or off. When on set will turn off when using the Channel Up button from the highest
Roll programmed channel and the Channel Down button when on the lowest programmed channel. Use the
Left/Right arrow buttons to change.
Press the "ENTER" button.
3.
4. Enter the Virtual Channel number using the keypad then press enter.
5. To clear a Virtual Channel number select the Virtual Channel in the NUM column
and press the ENTER button twice.
NOTE: Each time you enter a Virtual Channel number the TV does a check to make sure the Virtual
Channel number has not already been used. If the Virtual Channel number has been used an error
message will be displayed and the entry cleared. Select a different Virtual Channel number if this
occurs.
Advanced channel settings
Channel Current Channel. Use the left/right arrow button to change the current channel
Number without leaving the menu screen.
In Channel When checked the current channel is in the channel list and can be tuned to.
List When un-checked current channel is not in the list and con not be tuned to.
Use this feature to add and delete channels.
Virtual CH When on the channel lineup is determined by the Virtual channel list. See page 34.
No. When off the standard channel list is used. Selections are:
Real Channel When on, the OSD channel will show both the Virtual Channel number and the real
Display channel number. This is useful for setting up and testing the virtual channel lineup.
When set to off only the virtual channel number is displayed This feature is only
active when Virtual CH No. is set to On. Selections are:
Source Enables or disable input sources based on the current tier setting. A check in the
Bank box indicates the source is enabled for the tier. If the box is un-checked the source is
disabled for that tier. Only enabled sources can be selected using the SOURCE or
INPUT buttons.
Cable Select if the signal source is from a cable company
Air Select if the signal source is from an off-air antenna.
HealthCare Information, LLC
On - Off
On – Off
Cable – Air
20