Pc Settings; Auto Adjust; Horz/Vert Position; Clock - HealthCare Information BedMate II Operation Manual

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL
PC Adjusts screen settings for using set as a computer monitor. Input must be set to VGA to adjust these
Settings settings.

Auto Adjust

Horizontal
Position
Vertical
Position

Clock

Phase

Reset
Color Sets how colors are displayed. Set for best color reproduction. Selections are:
Temperature

Backlight

Adjusts LCD back light level.

Advanced

Adjusts advanced picture settings.

SOUND

Sound Basic sound adjustments
Settings

Sound Mode

Automatically adjust screen size to match VGA input.
Adjusts the horizontal position of the picture.
Adjusts the vertical position of the picture.
Adjusts sync timing. Should be left at factory default.
Adjusts VGA phase. Should be left a factory default.
Resets PC SETTINGS to factory defaults.
Normal – Warm – Cool

SABC

Film Mode

Noise Reduction

Use lowest setting possible. Setting to a level higher than needed may cause a reduction in picture
quality. Low works best for analog channels.
MPEG Noise Reduction
Use lowest setting possible for all noise reduction settings. Setting to a level higher than needed may
cause a reduction in picture quality.
Selects preset or User sound modes. Selections are:
Standard – Soft – User – Dynamic
Standard
Soft
User
Dynamic
HealthCare Information, LLC
Adjusts dynamic luminance. Set for best picture quality. Settings are:
Off – Low – Med - High
Detects and adjusts for videos that have a 25Hz frame rate. Allows for
smoother play back of videos with a 25Hz frame rate.
On - Off
Sets level of video noise reduction. Selections are:
OFF – Low – Medium – High
Sets level of video noise reduction when playing an MPEG file.
Factory default setting.
Provides a softer sound.
Uses user settings for Bass, Treble and Balance settings
Provides a more bold sound
17