Channel; Channel Settings; Channel Label; Education - HealthCare Information BedMate II Operation Manual

----------------------------------------------------------------------------------BedMate II OPERATIONS MANUAL

CHANNEL

Channel Add channel labels and Bank (tier) setup.
Setting
Channel
Number
Channel
Label

Education

NOTE:
Bank
Select
Bank
Control
Current channel being edited. Channel is displayed behind menu. Use left/right arrow keys
to change.
Sets channel label. Use left/right arrow buttons to select character to edit. Green underscore
indicated character being edited. Use up/down arrow buttons to edit character. Press the
"ENTER" button when finished.
Sets this channel as an education channel. Education channels are selected using the "EDU"
or "FAV" buttons. Press the "ENTER" button to select or un-select.
Each time the "EDU" or "FAV" button is pressed the TV will go to the next channel setup as
an Education Channel. When the last Education Channel is showing the next press of the
"EDU" or "FAV" button will go to the first channel setup and an Education Channel.
Selects the current bank. Use the left/right arrow keys to change. Selections
are:
Bank 1 – Bank 2 – Bank 3 – Bank 4
NOTE: See page 25 about changing the Bank using the "B" button on the IR remote control.
The TV has four banks (also know as tiers) to store active channel lists. When an auto scan
is performed, all channels found are set to active in all BANKs. The default bank is BANK1.
Using the bank edit function, the active channels can be enabled or disabled in each bank.
Banks can also be copied from one to another. All channels in a bank can also be completely
cleared or set. The last column is used to set the virtual channel number. See page 35 for
more information on Banks and page 34 for more information on virtual channels.
1. Use the left/right and up/down arrow buttons to select the bank and channel to edit.
Press the "ENTER" button to select or un-select an individual channel. Un-selected
2.
channels will be skipped when its bank is selected.
Press the RED arrow button to select all channels in the current bank the cursor is
in.
Press the GREEN arrow button un-select all channels in the current bank the cursor
is in.
To copy one bank to another:
Move the cursor to the bank your wish to copy and press the "YELLOW" arrow
1.
button.
Move the cursor to the bank you wish to copy to and press the "BLUE" arrow
2.
button.
Press the "BACK" button to exit bank editing
A typical use for banks would be for a simple rental system. Bank 1 could have only free and patient
education channels active. Bank 2 could have free, basic and patient channels active. Bank 3 could
have free, basic, premium and patient channels active. Bank 4 could have only staff channels active.
In this way a single distribution system can deliver all channels to each TV, but only the active
channels in the selected bank can be viewed on the TV.
To set the Virtual Channel number:
1. Use the right arrow button to move the selection to the NUM column.
2. Use the Up/Down arrow buttons to select the channel to set.
HealthCare Information, LLC 19