Command Mode - Ihse K473-SSH User Manual

DSXi KVM Extender
5.4

Command Mode

During normal use, the console keyboard functions in the usual manner.
However, for all KVM Extenders with USB-HID support, you can set the
keyboard into a Command Mode by using a specific 'Hot Key' sequence.
While in Command Mode, several functions are performed via keyboard
commands. To exit Command Mode, press <Esc>.
While in Command Mode, the LEDs Shift and Scroll on the console
keyboard will flash.
In Command Mode normal keyboard and mouse operation will cease.
Only selected keyboard commands are available.
The following table lists the keyboard commands to enter and to exit
Command Mode and to change the 'Hot Key' sequence:
Function
Enter Command Mode
(default)
Exit Command Mode
Change 'Hot Key' sequence
<Key> + <Key>
<Key>, <Key>
2x <Key>
The 'Hot Key' sequence to enter Command Mode can be changed. The
following table lists the 'Hot Key' Codes for the available key sequences:
'Hot Key' Code
1
2
3
4
5
6
7
8
Pos: 25 /806-IHSE/Betrieb/UEB_Betrieb @ 5\mod_1278577614980_6.doc @ 41970 @ 1
26
Press keys simultaneously
Press keys successively
Press key quickly, twice in a row
(similar to a mouse double-click)
Keyboard Command
2x <Left Shift> ('Hot Key')
<Esc>
<Left Ctrl> + <Left Shift> + <c>,
<'Hot Key' Code>, <Enter>
'Hot Key'
<Left Ctrl> + <Left Shift> + <i>
2x <Scroll>
2x <Left Shift>
2x <Left Ctrl>
2x <Left Alt>
2x <Right Shift>
2x <Right Ctrl>
2x <Right Alt>
2011-02-23