Access Option; Command Mode - Ihse Draco vario DisplayPort 1.1 483 Series User Manual

Draco vario DisplayPort 1.1
5

Access Option

You have following options to configure and/or operate the extender module and add-on module:
Access option

Command mode

Management software
5.1 Command Mode
To access the command mode, use a keyboard sequence (Hot Key) at the keyboard of a CON Unit
plugged in a KVM device.
The command mode can also be called up using a keyboard with USB-HID interface connected to an add-
on module.
To quit the command mode, press the
While in command mode,
 the Caps Lock and Scroll Lock LEDs on the keyboard are flashing,
 the USB-HID devices are not operable, mouse and keyboard functions are deactivated,
 only selected keyboard commands are available.
If there is no keyboard command entered within 10 seconds after activating the command mode, it will be
deactivated automatically.
The following spellings are used for keyboard commands:
Keyboard command
<key>
<key> + <key>
<key>, <key>
2x <key>
Description
The CON extender modules include a command mode that enables access to
several functions of connected KVM devices, e.g., Draco U-Switch or Draco tera
matrix switch when using additional keyboard commands.
In addition, individual extender module functions for USB-HID Ghosting and the
EDID, as well as switching via command mode and additional keyboard
commands can be executed.
Firmware updates for extender modules can be performed via the management
software.
The management software is available in the form of a single executable
program file. The management software can be downloaded from the link
https://www.ihse.com/software.
For extender modules connected to a matrix, additional functions are available
in the management software. For more information, please refer to the manual
of the respective IHSE Draco tera matrix.
<Esc>
key to exit the command mode.
Description
Description of a key on the keyboard
Press keys simultaneously
Press keys successively
Press key quickly, twice in a row (like a mouse double-click)
NOTICE
Access Option
61