Table of Contents
Advertisement
Draco vario
DVI/Draco vario ultra DVI
5
Access Options
You have following options to configure and/or operate extender modules:
Access option
Command mode
Management software
Mini-USB interface
5.1
Command Mode
To start the command mode, use a keyboard sequence (Hot Key) at the keyboard of a CON Unit plugged in a
KVM device. The command mode can also be called up using a keyboard with USB HID interface connected to the
R474-BXH add-on module.
While in command mode,
the Caps Lock and Scroll Lock LEDs on the keyboard are flashing,
the USB HID devices are not operable, mouse and keyboard functions are deactivated,
only selected keyboard commands are available.
If there is no keyboard command entered within 10 seconds after activating the command mode, it will be
deactivated automatically.
The following keyboard commands are used to enter, and to exit the command mode, and to change the Hot Key.
Function
Start the command
mode
Exit the command
mode
Change the Hot Key
Description
The CON extender modules include a command mode that enables access to several
functions of connected KVM devices, e.g., Draco U-Switch or Draco tera matrix switch
when using additional keyboard commands.
In addition, individual extender module functions for USB HID Ghosting and the EDID, as
well as switching via command mode and additional keyboard commands can be
executed.
Firmware updates for extender modules can be performed via the management software.
The management software is available in the form of a single executable program file.
The management software can be downloaded from the link
https://www.ihse.com/software.
For extender modules connected to a matrix, additional functions are available in the
management software. For more information, please refer to the manual of the respective
IHSE Draco tera matrix.
Extender modules can be parametrized or updated via Mini-USB interface.
Keyboard command
2x Left Shift (Hot Key, factory setting)
Esc and also Left Shift + Esc, if necessary
current Hot Key, c, new Hot Key Code, Enter
NOTICE
Access Options
33
Advertisement
Table of Contents
