Multiple Aps - Sapido RB-1842 User Manual

Control Sideband
Channel Number
Broadband SSID
Data Rate
Associate Clients
Enable MAC Clone
(Single Ethernet Client)
Enable Universal Repeater
Mode (Acting as AP and
Client simultaneously)
SSID of Extended Interface
Apply Change & Reset
* Under WiFi AP Mode, there are 2 options of Network type: Infrastructure or Ad hoc. Select
Infrastructure if connecting to a wireless router or access point. Select Ad hoc if connecting directly to
another wireless adapter.
4.1.2.1

Multiple APs

The RB-1842 can register up to 4 SSIDs (wireless LAN group). It can be used as if there
are multiple wireless LAN access points with one product. Each SSID could be set with
different data rate, WMM and access type.
http://www.sapido.com.tw
Enable this function will control your router use lower or upper
channel.
Please select the channel; it has Auto, 1, 2~11 or 13 options.
User may choose to enable Broadcast SSID or not.
Please select the data transmission rate.
Check the AP connectors and the Wireless connecting status.
Clone the MAC address for ISP to identify.
Allow to equip with the wireless way conjunction upper level,
provide the bottom layer user link in wireless and wired way in the
meantime.
(The IP that bottom layer obtains is from upper level.) Please also
check Section 4.1.2.2
While linking the upper level device in wireless way, you can set
SSID to give the bottom layer user search.
Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.
42 User Manual 1.0