1. Manuals
  2. Brands
  3. Sapido Manuals
  4. Network Router
  5. we 1110
  6. User manual

Sapido we 1110 User Manual

Nes mini server router with mfp
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the we 1110 and is the answer not in the manual?

Questions and answers

Related Manuals for Sapido we 1110

Summary of Contents for Sapido we 1110

  • Page 2: Table Of Contents

    Table of Content COPYRIGHT STATEMENT ........................9 WARRANTY............................10 FCC CAUTION .............................11 SAFE SEATING GESTURES:......................12 CE STATEMENT OF CONFORMITY ....................12 CHAPTER 1 INTRODUCTION ......................13 ......................... 13 VERVIEW ......................... 14 EATURES ........................ 15 PECIFICATIONS 1.3.1 Product Appearance Introduction ..............16 ....................
  • Page 3 3.2.6 USB Disk Management Setup................39 3.2.7 User Account Management Setup..............40 3.2.8 Firewall Setup..................... 41 3.2.9 QoS Configuration Setup .................. 42 3.2.10 FTP Server Setup ....................43 3.2.11 Web Camera Server Setup ................44 3.2.12 Printer Server Setup ..................45 3.2.13 Samba Server Configuration Setup ..............
  • Page 4 3.5.3.1 Printer Setting on PC....................88 3.5.3.2 How to scan via scanner ..................94 3.5.4 Audio Server....................... 96 3.5.5 Samba Server ..................... 97 3.5.5.1 How to enter the sharing floder................98 ..................... 100 YSTEM MANAGEMENT 3.6.1 Reboot ....................... 100 3.6.2 Change Password ....................
  • Page 5 4.2.7 FTP Server Setup ..................... 134 4.2.8 Web Camera Server Setup ................134 4.2.9 Printer Server Setup ..................135 4.2.10 Samba Server Configuration Setup ............... 136 4.2.11 Audio Server Setup..................136 4.2.12 Quick Setup Finish................... 137 IP C ........................138 ONFIG 4.3.1 LAN ........................
  • Page 6 Network Configuration...................... 182 User Account List ......................183 Event Log 184 .......................... 185 OGOUT ..................... 185 ERSONAL ONFIGURATION 4.8.1 Anonymous ...................... 187 4.8.2 My Document....................188 4.8.3 My Webcam ...................... 189 4.8.4 My Status ......................190 ........................191 CHAPTER 5 CLIENT MODE ......................192 .................
  • Page 7 5.4.2.3.2.2 Personal Application ..................221 Printer / MFP Server ......................222 5.4.3.1 Printer Setting on PC.................... 223 5.4.3.2 How to scan via scanner ..................229 5.4.4 Audio Server..................... 231 5.4.5 Samba Server ....................232 5.4.5.1 How to enter the sharing floder................233 ....................
  • Page 8 USB FTP S ........................272 ERVER ......................... 272 EBCAM ERVER .......................... 273 RINTER ERVER ............................273 UPPORT THERS USB D ..........................274 EVICE CHAPTER 8 APPENDIX........................275 ..........................276 AMERA USB S ......................... 284 TORAGE EVICE ..........................285 ROWSER SADOGO U ........................

  • Page 9: Copyright Statement

    DETAIL, WHOLE CREATION, EVEN PART OF CREATION CANNOT BE PUBLISHTED VIA THE MENTIONED METHODS BY OTHERS. FOR INSTANCE, DOCUMENTATION OF TRANSLATION OR MODIFICATION IS PROHIBITED. All trademarks and trade names are the properties of their respective owners. COPYRIGHT © 2007 ALL RIGHTS RESERVED BY SAPIDO.

  • Page 10: Warranty

    Warranty One-Year Warranty is provided for consumer products. This warranty is subject to the conditions and limitations set forth herein. ("We") warrants and tests the Product to be free from defects in material and workmanship and to conform to published specifications. During the warranty period, should the Product fail under normal use in the recommended environment due to improper workmanship or materials, we will repair the Product or replace it with a comparable one.

  • Page 11: Fcc Caution

    FCC Caution 1. The device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. 2.

  • Page 12: Safe Seating Gestures

    Safe Seating Gestures: You should follow the manufacturer’s instructions for adjusting the backrest to fit your body properly. An adjustable chair that provides firm, comfortable support is best. Adjust the height of the chair so your thighs are horizontal and your feet flat on the floor.

  • Page 13: Chapter 1 Introduction

    Chapter 1 Introduction Overview WE-1110 (NES-Mini Server Router with MFP) in order to combine functions, such as Router, Bridge, AP and USB port application...etc., the main distinguishing feature can link the USB MFP, providing to scanner, printer and card reader share to the user in LAN, or match with an USB web camera to be used as instant supervision tool, can also mount USB hard drive or portable disc, then become a FTP server.

  • Page 14: Features

    Features WE-1110’s main functions, including Wireless Access, Webcam Server, MFP Server, FTP Server, Samba Server, Audio Server and IP Sharing are shown as below. These features are belonging to WE-1110 and applying instructions of the User’s Manual will not only fulfill your requirements, but also ease your inconvenience from the job.

  • Page 15: Specifications

    Specifications Connector: 1x RJ-45,10/100 Base TX for WAN Router Mode 1x RJ-45,10/100 Base TX for LAN Three Mode AP Mode Connector: 2x RJ-45,10/100 Base TX for LAN Connector: 2 RJ-45, 10/100 Base TX to LAN Wireless to Client Mode Access Point. Interface Connector: Wireless WLAN...

  • Page 16: Product Appearance Introduction

    1.3.1 Product Appearance Introduction System Requirements To begin with WE-1110, you must have the following minimum system requirements. If your system can’t correspond to the following requirements, you might get something unknown troubles on your system. XDSL/Cable Modem and broadband Internet Account. One Ethernet (10 BASE-T or 10/100 BASE-TX) network interface card.

  • Page 17: Get Your Ip Automatically & Manually

    Get your IP Automatically & Manually After WE-1110 connected with your computer, please make sure your IP is in the automatic IP position or you adjust it as manually in order to activate the network from home to Internet. If you don’t know how to enter the settings, please follow the steps as below. 【Step1】...
  • Page 18 【Step2】 Click on Properties button. 【Step3】 Double click on Internet Protocol (TCP/IP).
  • Page 19 【Step4-1】 For getting IP automatically if you are one of the users under WE-1110, please skip “Use the following IP address” and then select “Obtain an IP address automatically” and “Obtain DNS server address automatically” and then click on “OK” button. 【Step4-2】...

  • Page 20: Network Testing

    For example: IP Address: 192.168.1.xxx (xxx can be any number between 2 and 253, but it can’t repeat, we use 10 to be the example.) Subnet Mask: 255.255.255.0 Gateway: 192.168.1.254 (this is the IP address of the WE-1110 in AP Mode) DNS: 192.168.1.254 (use the WE-1110’s IP address or on your own choice).

  • Page 21: Testing With Internet Browser

    1.5.1.1 Testing with Internet Browser Open an Internet Browser, such as Internet Explore or Netscape. Input a valid web address you like http://www.yahoo.com for example in the web address blank and then press Enter. If it can work, the website will appear, that means your Network to the Internet is under normal situation.

  • Page 22: Testing Wirh Dos (Windows Xp Platform)

    1.5.1.2 Testing wirh DOS (Windows XP platform) 【 【 【 【 Step1】 】 】 】 Go to start > Run. 【 【 【 【 Step2】 】 】 】 Input cmd in the blank, and then click on OK button. The DOS will appear. 【...
  • Page 23 If it can’t work, it will show Request timed out.

  • Page 24: Chapter 2 Hardware Installation

    Chapter 2 Hardware Installation Diagram of connecting hardware to WE-1110 The WE-1110 is a portable and convenient wireless solution for the traveling business person delivering 802.11g wireless connectivity with a maximum wireless signal rate of up to 54Mbps. Use it in conference rooms, hotel rooms, or even at hotspots. The Wireless Pocket Router/AP might be small in size, but huge in functionality, supporting multiple operation modes, including Access Point (AP) mode, Router mode, and Wireless Client mode.

  • Page 25: Clint Mode Hardware Connection And Application

    including LAN Setup, Wireless Setup, USB Disk Management Setup, User Account Management Setup, FTP Server Setup, Audio Server Setup, Web Camera Setup, Time Server Setup, Password Setup, Samba Server Setup and MFP Server Setup. 2.1.3 Clint Mode Hardware connection and application As Client Mode, NES Mini Server Router with MFP will be a Wireless Adapter, and users can plug cable to each 2 LAN ports and then connect Internet via Wireless.

  • Page 26: Chapter 3 Router Mode

    Chapter 3 Router Mode Administrator Quick Setup Instruction Make sure to switch the mode into Router Mode, then open a Microsoft Internet Explorer, Mozilla Firefox or Apple Safari browser, and input http://192.168.1.1 (Default Gateway) into browser’s blank. Notice: If the homepage doesn’t appear, please check if the TCP/IP configuration is obtaining IP address automatically or not.
  • Page 27 User Name and Password The default values for Username and Password are “admin” and “admin” (all in lowercase letters). Notice: Only the password can be changed, please read setup “3.2.5 Password Setup” or “3.6.2 Change Password”. In order to protect your own settings, it’s strongly recommended to change the password before you finish the Router Basic Setup.

  • Page 28: Quick Setup

    Quick Setup Typical Configuration Manager Page consists of two separate frames. The left frame contains all the means available for device configuration. Menus are indicated by file icons, and related menus are grouped into categories, such as LAN, WAN and etc., and indicated by folder icon, depending on whether the group of menus are expanded or not.
  • Page 29 Quick Setup Basic Table List Click “Basic” button to begin setup including WAN Setup、LAN Setup、Wireless Setup、 Time Server Setup and Password Setup. Default setting and has to be set Quick Setup of Basic instruction WAN Setup: Setup the connecting type provided by your ISP, 4 modes of WAN connection are supported by WE-1110 –...

  • Page 30: Wan Setup (Internet Connection)

    3.2.1 WAN Setup (Internet Connection) WAN is short for Wide Area Network. The WAN settings can be referred to as the Public setting. All IP information in the WAN settings is public IP addresses which are accessible on the Internet. The WE-1110 supports 4 connection types to WAN. Select one of the WAN connection modes required by your ISP in below Internet Connection Configuration page, the WAN setting pages will differ depending on what kind of WAN Type you select.

  • Page 31: Wan Type - Static Ip

    3.2.1.1 WAN Type – Static IP Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will need to input in the IP address, IP Netmask and IP Gateway provided by your ISP. Each IP address inputed in the fields must be in the appropriate IP form, which are four IP octets separated by a dot (x.x.x.x).

  • Page 32: Wan Type - Dynamic Ip

    3.2.1.2 WAN Type – Dynamic IP Choose Dynamic IP to obtain an IP address information automatically form your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services. If ISP provided you DNS information, please select “Specify DNS Server IP”;...

  • Page 33: Wan Type - Pppoe

    3.2.1.3 WAN Type – PPPoE This option is typically used for DSL services. Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses PPPoE connection. Your ISP will provide you with a username and password. MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need to change the MTU setting in order to work correctly with your ISP.

  • Page 34: Wan Type - Pptp

    3.2.1.4 WAN Type – PPTP This option is typically used for DSL services. Some DSL service providers supply a special DSL modem. This kind of modem only supports the PPTP tunnel to access the Internet, you should create a PPTP tunnel that carries a PPP session and terminates on the DSL model.

  • Page 35: Lan Setup

    3.2.2 LAN Setup If you are using the WE-1110 with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to each device residing on your LAN. The LAN IP address identifies the router as a node on your network;...

  • Page 36: Wireless Setup

    3.2.3 Wireless Setup WE-1110 is based on industry standards to provide compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the router will allow you to access the data you want, when and where you want it.

  • Page 37: Time Server Setup

    3.2.4 Time Server Setup The section provides to change the Time. The Router keeps a record of the current date and time, which is used to calculate and report various performance data, but changing the router’s date and time does not affect the date and time on your PCs. Select your time zone from the “Time Zone”...
  • Page 38 clicks on “Next” button. Notice 1: Only the password can be changed, the user name for administrator is “admin” and is not allowed to be changed. Notice 2: If you forget administrator’s password, please reset the WE-1110 to default setting by pushing the “Reset”...

  • Page 39: Usb Disk Management Setup

    3.2.6 USB Disk Management Setup Easy to check all the USB storage devices connected to your WE-1110, view the entire data folder inside each storage devices, and you can do the disk formatting via click on the button in this page. Select the USB Disk and click on “OK”...

  • Page 40: User Account Management Setup

    3.2.7 User Account Management Setup Personal users can use each individual application such as My Status, My Webcam and My Document. This section is to set the user’s right. Also, all the users right will be showed in User Account List and can do the edit or delete by clicking the meaning text. Input the user’s name and password, and then click on “Add”, and you will see the user information appear on the “User Account List”.

  • Page 41: Firewall Setup

    3.2.8 Firewall Setup The Firewall rules of WE-1110 are an advance feature used to deny or allow traffic from passing through the router. The default setting for Firewall Protection Level security is in Low Level, which Attacks Blocking Policy, allow all Inbound and Outbound IP Filter Policy, and allow all router service access policy from WAN;...

  • Page 42: Qos Configuration Setup

    3.2.9 QoS Configuration Setup QoS management helps to set and evaluate QoS policies and goals. It is the particular concern for the continuous transmission of high-bandwidth video and multimedia information. Transmitting this kind of content dependably is difficult in public networks using ordinary best effort protocols.

  • Page 43: Ftp Server Setup

    3.2.10 FTP Server Setup WE-1110 can be the FTP Server provides users to transmit files, also for the guest can download the files from assign website. Moreover, by connecting USB HDD, USB Flash to the router, user can easily set up a FTP Server to share or download files for local or remote users.

  • Page 44: Web Camera Server Setup

    3.2.11 Web Camera Server Setup If you plan to use the WE-1110 as a Web Camera site, connect a supported USB Web Camera to the USB port of the WE-1110. To enable the webcam server and access from WAN as demand, and the Image format can be selected. Make sure the webcam already connected to WE-1110, and then select “Enable”...

  • Page 45: Printer Server Setup

    3.2.12 Printer Server Setup WE-1110 supports Multi-Function Printer (MFP) such as HP2610, supported features including printer, scanner, and cardreader. Scanner Server and Cardreader Server will be shown as Enable, therefore users can use MFP features form LAN. If the printer isn’t connected, you can’t choose “Enable”.

  • Page 46: Samba Server Configuration Setup

    3.2.13 Samba Server Configuration Setup Samba is a software package that gives network administrators flexibility and freedom in terms of setup, configuration, and choice of systems and equipment. Support NetBIOS protocol, the consumer sharing file and printer which provides as the My Network Places.

  • Page 47: Quick Setup Finish

    3.2.15 Quick Setup Finish Below screen will be shown when the Quick Setup is completed successfully. To apply your new settings, please click on “Finish” button to reboot system automatically and goes to the Product’s Diagram Homepage. You may connect to Internet via wire or wireless at this moment according to above settings.

  • Page 48: Ip Config

    IP Config This function allows you to add routing rules into WE-1110. It is useful if you connect several computers behind WE-1110 to share the same connection to Internet. 3.3.1 Select WAN under the IP Config menu. WE-1110 supports four WAN connection types, i.e. Static IP, Dynamic IP, PPPoE and PPTP.
  • Page 49 2. Subnet Mask Input your Subnet Mask supplied by ISP 3. IP Gateway Input your IP Gateway Address. If you don’t know, please check with your ISP. 4. DNS If ISP provided you DNS information, please select “Specify DNS Server IP” and input the DNS information into the blank;...
  • Page 50 2. MAC Address: Keep, Clone & Input MAC Address Select Keep or Clone MAC Address for copying the MAC address of your Ethernet adapter to the gateway, or input a group of MAC Address. Generally, your ISP will remind you. 3.
  • Page 51 Input your Password supplied by ISP. 3. MTU MTU stands for Maximum Transmission Unit. For PPPoE connections, you may need to set the MTU setting in order to work correctly with your ISP. 4. Idle Time The time of inactivity before disconnecting your PPPoE session. Input an Idle Time (in minutes) to define a maximum period of time for which the Internet connect is maintained during inactivity.
  • Page 52 1. PPTP Select connect to PPTP by on demand, Always Online or Manual connects. 2. PPTP Account Input the PPTP Account supplied by ISP. If you don’t know, please check with your ISP. 3. PPTP Password Input the Password supplied by ISP. 4.

  • Page 53: Lan

    8. MTU MTU stands for Maximum Transmission Unit. For PPTP connections, you may need to set the MTU setting in order to work correctly with your ISP. 9. Idle Time The time of inactivity before disconnecting your PPTP session. Input an Idle Time (in minutes) to define a maximum period of time for which the Internet connect is maintained during inactivity.
  • Page 54 1. IP Address The default value of LAN IP address is 192.168.1.1 for this router. 2. IP Netmask Input Subnet Mask, normally it is 255.255.255.0. 3. DHCP Enable or Disable DHCP services. The DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer if Enabled. 4.

  • Page 55: Wireless

    7. Router This field indicates the IP address of Router to provide to clients that request IP Address from DHCP Server, the default setting is the same with LAN IP address. 8. DNS This field indicates the IP address of DNS to provide to clients that request IP Address from DHCP Server, the default setting is the same with LAN IP address.
  • Page 56 1. Wireless Select AP/Bridge or WDS to allow or disallow the wireless operation. 2. Wireless Mode This field indicates the 802.11g interface mode. “802.11G” prevents the 802.11b clients from accessing the router. “802.11B/G” allows both 802.11b and 802.11g clients to access the router.
  • Page 57 direct sequence device is called Channel. The 802.11g and 802.11b specification supports up to 14 overlapping Channels for radio communication. But only 11 Channels are supported in the United States and therefore on WE-1110. To minimize interference, configure each WE-1110 to use Non-overlapping channels.
  • Page 58 11. Encrypt Type - WEP There are two types of encrypt type can be selected, including WEP and WPA. WEP Encryption: Enabling WEP can protect your data from eavesdroppers. If you do not need this feature, select “None” to skip the following setting. The WE-1110 supports both 64-bit and 128-bit encryption using the Wired Equivalent Privacy (WEP) algorithm.
  • Page 59 Encrypt Type - WPA The WPA encrypts each frame transmitted from the radio using the pre-shared key (PSK) which inputed from this panel or a key got dynamically through 802.1x. WPA-PSK (TKSP): Allow the access from WPA clients simultaneously and the encryption keys are given from PSK respectively.

  • Page 60: Ddns

    RADIUS Server IP: The IP address of RADIUS server. RADIUS Server Port: The UDP port number that the RADIUS server is listed. The default value is 1812. Shared Secret: The RADIUS server and client share a secret that is used to authenticate the messages sent between them.

  • Page 61: Advance

    2. Enable / Disable DDNS Select Enable to use DDNS function, each time your IP address to WAN is changed, the information will be updated to DDNS service provider automatically. 3. Host Name This field represents the Host Name you register to Dynamic-DNS service and expect to export to the world.

  • Page 62: Virtual Server

    specified services, where NAT stands for Network Address Translation. It allows the internal IP addresses of many computers on a Local Area Network (LAN) to be translated to one public address, saving users’ cost. It also plays a security role by obscuring the true IP addresses of important machines form potential hackers on the Internet.

  • Page 63: Virtual Dmz

    1. Enable Virtual Servers: Check “Enable” applies all those rules in Virtual Server List into the WE-1110. 2. Description: Input the description of the virtual server, this filed allows you to record what this rule is used for. 3. Private IP: Specify the private IP address of the internal host offering the service. 4.

  • Page 64: Firewall

    1. Enable/Disable Virtual DMZ: Check “Enable” applies Virtual DMZ for the Router. 2. IP Address: This field stands for the destination IP address that you like to redirect the matched packet to. 3. Apply & Cancel Click on Apply button to continue. Click on Cancel button to clean the setting on this page.
  • Page 65 1. Firewall Protection Level: Select the level from the drop-down list, including High, Medium and Low. The below screen including SPI service and ICMP setting will change according to your level setup. 2. Enable SPI Service: The WE-1110 often monitor a wider range of activity, such as patterns of traffic and the type of application sending traffic.
  • Page 66 4. DoS Attacks Blocking Settings Enable DoS Attacks Blocking: The following sections will explain in more detail about DoS Defense setup by using the web configurator. There are a total 8 kinds of defense function for the DoS Defense Setup. By default, the DoS Defense functionality is disabled.
  • Page 67 MIME Flood: Check or un-check this option to enable or disable protection against MIME attacks. You can select this box to protect the mail server in your network against MIME flooding. FTP Bounce: Check or un-check this option to enable or disable protection against FTP bounce attack.

  • Page 68: Ip Filter

    there can be a maximum of 45 fragments per IP packet. If the MTU is less, then there can be more number of fragments and this number should be increased. Minimum IP Fragment Size: Input the Minimum size of IP fragments to be allowed through Firewall.
  • Page 69 2. Enable Log: All packets between WAN and LAN will be logged. 3. Source: To specify the appropriate IP address / mask and input the source port number. 4. Destination: Allows you to set the destination address / mask to which this rule should apply and input the source port number.

  • Page 70: Mac Filter

    button to add the settings into the list table. Click on Cancel button to clean the setting on this page. 3.4.2.3 MAC Filter Use MAC Filters to deny LAN computers by their MAC addresses from accessing the Internet. You can manually add a MAC address that is currently connected to the WE-1110. 1.

  • Page 71: Url Filter

    6. Time Ranges: Apply MAC Filter by setting time ranges. 7. Add, Apply & Cancel After finish above setting, click Add button to create the MAC configuration rule. Click on Apply button to add the settings into the list table. Click on Cancel button to clean the setting on this page.
  • Page 72 1. Enable URL Filter: Check Enable or Disable to apply URL Filter function. 2. Enable log: All packets between WAN and LAN will be logged. 3. Description: Input the filter description into this blank. 4. URL keyword: Input the URL key words into this blank to apply filter blocking, example: “yahoo”, then it’ll block all the websites from yahoo range.

  • Page 73: Qos

    7. URL Filter List All URL filter will be shown on the list, and can process Edit and Cancel feature. 3.4.3 Quality of Service (QoS) refers to the capability of a network to provide better service to selected network traffic over various technologies, including Frame Relay, Asynchronous Transfer Mode (ATM), Ethernet and 802.1x networks, and IP-routed networks that may use any or all of these underlying technologies.

  • Page 74: Server

    3. Priority: To limit the bandwidth consumed over a backbone link by FTP transfers or give priority to an important database access. And below application can be selected each items and distribute the priority level. 4. Application: Including FTP, HTTP, E-mail, Telnet, Voice, Games, IM and Video priority setting.
  • Page 75 timely fashion. It is also cost effective where users do not need to purchase a dedicated PC to set up a 24 hours FTP service. Before configure FTP Server, please make sure the storage device is properly plug into any USB port on the router and make sure this USB storage device is detected by the router.

  • Page 76: Web Camera Server

    6. Apply & Cancel Click on Apply button to continue. Click on Cancel button to clean the setting on this page. 7. User Account List User Name、Status and Opened Directory/File can be shown on the list. Notice: FTP server is compatible with FAT32 or EXT3 format USB storage device. In case you need to format your USB storage device.

  • Page 77: Web Camera Server Basic Setting

    3.5.2.1 Web Camera Server Basic Setting 1. Enable Webcam Server: Allow using this function for checking on Enable. 2. Access from WAN: Allow webcam can access from WAN side by checking on Enable for this item. 3. Preview: Click on this button, you can preview the image from webcam. 4.
  • Page 78 1. Enable save image: If you want to save the image from webcam, please check on Enable. 2. Save image interval: For saving image, you can set the save interval time, the default value is 5 seconds. 3. Save Location: Set the save location for webcam image, you may save into USB HDD or Remote FTP;...

  • Page 79: Application For Web Camera

    9. Remote FTP Directory: To provide option of which folder should be used for saving webcam image. 10. Back: Click on Back button for returning to Webcam Basic Setting screen. 11. Apply & Cancel Click on Apply button to continue. Click on Cancel button to clean the setting on this page.

  • Page 80: Web Camera Monitoring Via Wan Connecting

    3.5.2.3.1.1 Web Camera Monitoring via WAN connecting For viewing the image via webcam from WAN connecting, below is the diagram. How to check your WAN IP address To monitor the image via webcam from outside door, you need to now the WAN IP address. Select “Network Configuration”...
  • Page 81 Monitor the image via webcam from WAN Input the WAN IP Address (as you see in above screen) into browser blanks, and you will see the personal account login screen appear then input your own user account and password. After login by personal, your will see the personal control panel screen as below, please click on “My Webcam”.

  • Page 82: Web Camera Motoring Via Wifi Mobile Phone

    3.5.2.3.1.2 Web Camera Motoring via WiFi mobile phone Also, you may view the monitor live action through WiFi mobile phones. Please address plus “/webcam.html” (ex: http://210.64.134.25/webcam.html) into the mobile phone’s browser blank and you will see the webcam user login screen appeared.

  • Page 83: Web Camera Recording

    After login by your own account, you will see the monitor image from web camera via WiFi mobile phone. 3.5.2.3.2 Web Camera Recording 3.5.2.3.2.1 Administrator Setting WE-1110 also can record the pictures from Webcam; only Administrator can do the settings. Select Web Camera Server from main Menu and Enable this function, click on Record Setting button for further setting.
  • Page 84 To setup the Webcam Advanced Configuration for each blank, and the image from webcam will be recorded into your USB HDD or Remote FTP, please refer to User’s Manual for the detail setting. Click on Apply after setup finish. For administrator, you may view all the images from webcam recording, please select Folder Management and click on Disk Explorer to view entire folder inside the disk including webcam record files.
  • Page 85 After click on Disk Explorer, you will see the folder screen appear including all the folders inside the WE-1110. (Below is the example.) All the image files will be saved in the folder “webcam_recorded_files”, please open the file for checking.

  • Page 86: Personal Application

    3.5.2.3.2.2 Personal Application All the users under administrator’s setting can view entire webcam recording images from My Document. Please login by your own personal account. For viewing your own folder, please click on “My Document”. After click on “My Document”, you will see below folder screen appeared. Notice: If you can’t open the folder inside the FTP server, please check with administrator to setup your FTP &...

  • Page 87: Printer / Mfp Server

    3.5.3 Printer / MFP Server The NES Mini Server Router with MFP has two USB ports for connection with printers to be shared on the local area network. Follow the below steps to setup your PC to connect to a Printer/MFP server.

  • Page 88: Printer Setting On Pc

    6. Apply & Cancel Click on Apply button to continue. Click on Cancel button to clean the setting on this page. Besides above setting finished, the printer setting on PC also needs to be set as follows. 3.5.3.1 Printer Setting on PC After Enable Printer Server in Quick Setup and Printer Server Configuration, please follow below steps to set the detail LPR settings in your PC.
  • Page 89 Step 2: Click “Add a printer” Step 3: Click “Next”...
  • Page 90 Step 4: Click the “Local printer attached to this computer”, and then click “Next” Step 5: Click the “Create a new port” and select the “Standard TCP/IP Port”, and then click “Next”...
  • Page 91 Step 6: Click “Next” Step 7: Input the IP address of WE-1110: 192.168.1.1 (Router Mode), and then click “Next”...
  • Page 92 Step 8: Select the “Custom” and click the “Settings”, and then click “Next” Step 9: Select “LPR” and give it the same “Queue Name” as USB Printer Name as shown, and mark “LPR Byte Counting Enabled”. Finally, click on “OK” button.
  • Page 93 Step 10: Click the “Finish” Step 11: Select the “Manufacturer” and “Printers”. If your printer doesn’t listed in the table, please install its driver CD and then click on “Have Disk…” button for installation. Or click on “Next” button to finish the setting. You can name your printer, set it as default printer and share your printer in the next screens, the Printer Server setting is getting finally.

  • Page 94: How To Scan Via Scanner

    Step 12: Click on Finish button and all steps of setting printer server are completely. 3.5.3.2 How to scan via scanner If use the function of scanner, as long as is the software which supports scanning all can open the picture of scanning, take “Word” as an example as follows Step 1: Click “Insert”...
  • Page 95 Step 3: Set up each field value according to the demand, after complete setting, please click on “Scan” button to scan picture.

  • Page 96: Audio Server

    1. Image Type Include three image type: “Black & White”, “Grayscale”, and “Color(RGB)”. 2. Media Set up the media is “Reflective” or “Transparent”. 3. Mode Please select your operation mode of WE-1110. 4. Scan Area Set up width and height of scan area. 5.

  • Page 97: Samba Server

    1. Enable Samba Server Enable or disable this function. 2. Workgroup Name Input the workgroup name, default is “WORKGROUP”. 3. Server Name Input the server name, default is “WE1110”. 4. Server Description You can input description of the server, default is “SAPIDO WE-1110!”.

  • Page 98: How To Enter The Sharing Floder

    5. Apply & Cancel Click on Apply button to finish setting. Click on Cancel button to clean the setting on this page. 3.5.5.1 How to enter the sharing floder Please follow below step. Step 1: Please click the “start”, and select “My Computer”. Step 2: In the Address blank input the IP address: \\192.168.1.1.
  • Page 99 Step 4: Appear following menu, can open following to share internal data. Note: The most meetings appear four icons. 1. If connected USB flash or HDD, and then enable samba server function, it will appear a samba folder. 2. If connected USB printer or MFP, and then enable printer server function, it will appear a printer icon.

  • Page 100: System Management

    System management The NES Mini Server Router with MFP provides system management including Reboot, Change Password, Firmware Upgrade, Driver Upload, Profile Save, Remote Management, Time, UPnP Setting, User Account Management, Folder Management and Email Alert setting. Following is each setting. 3.6.1 Reboot If you had inputed the wrong configuration while setting up your router or other utilities, you...

  • Page 101: Change Password

    3.6.2 Change Password At this section, the administrator can change the system password. Only the password can be changed, the username for administrator is “admin” and can’t be changed anymore. 1. Old Password: Input the original password you set. 2. New Password: Input the new password you want to change. 3.

  • Page 102: Firmware Upgrade

    3.6.3 Firmware Upgrade You can upgrade the firmware of the WE-1110 at this page. Make sure the firmware you want to use is on the local hard drive of the computer 1. Update Firmware: Click on Browse button to browse the local hard drive and locate the firmware to be used for update.

  • Page 103: Driver Upload

    3.6.4 Driver Upload Provide consumer update the driver of the USB equipment; include an USB web camera, USB printer/MFP and the USB Flash/hard drive etc. equip. 1. Upload Driver Click on Browse button to browse the local hard drive and locate the dirver of USB equipment to be used for update.
  • Page 104 1. Save Settings To PC: Click on Save button for saving the configuration setting into assigned location. 2. Load Settings From PC: Click on Browse button for searching the saving configuration from hard drive, and then click on Load button to load all the setting into the router.

  • Page 105: Remote Management

    3.6.6 Remote Management Remote Management allows the WE-1110 to be configured from the Internet by a web browser. In general, only a member of your network can brose the built-in web pages to perform “Administrator” tasks. This feature enables you to perform the tasks from the remote (Internet) host.

  • Page 106: Time

    3. IP Address: Internet IP address of the computer that has access to the router. 4. Description: Input the description for the remote configuration. 5. Add, Apply & Cancel Click on Add button to increase the remote rule, click on Apply button to continue, or click on Cancel button to clean the setting on this page.
  • Page 107 1. Local Time: Router default time. 2. Default NTP Server: Select the NTP Server from the drop-down list. 3. Time Zone: Select your time zone location from the drop-down list. 4. Daylight saving time: If you are in daylight saving time area, please Enable this item. 5.

  • Page 108: Upnp Setting

    3.6.8 UPnP setting （Universal Plug and Play，UPnP） UPnP allows users to connect their UPnP-enabled broadband router, printer server and other devices right to the network with zero-configuration, meaning easier setup for installing the device on the network. The automatic discovery feature enables the device to obtain an IP address, present and describe itself to other devices and PCs on the network without having to install drivers, and then configure and use those devices.

  • Page 109: User Account Management

    3.6.9 User Account management Personal users can use each individual application such as My Status, My Webcam and My Document. This section is to set the user’s right. Also, all the users right will be showed in User Account List and can do the edit or delete by clicking the meaning text. 1.

  • Page 110: Folder Management

    3. Password: Setup the user’s password. 4. Group Right: Enable the use to view the webcam’s recording files. 5. User Right: Allow the user to monitor from webcam or use FTP server. 6. Activated: Click on On to allow the user’s right can be applied immediately. 7.

  • Page 111: Email Alert

    1. Select the USB Disk and click on OK button for refresh all disks before you do disk partition, and the Unplug button will appear. 2. To partition/format the disk, please select the disk and click on Format button. 3. Moreover, if you want to view the data inside the disk, please go to “3.5.1 FTP Sever Setup”...
  • Page 112 1. Email Alert: Check the Enable box to activate the email alert service. 2. SMTP Server: Specify an IP address of the SMTP server which can send mails from your WE-1110 to the recipients’ mailboxes directly. 3. Your Mail (from): Input the email address indicated the sending location. 4.

  • Page 113: Log & Status

    5. Account & Password: Input the email account and password which you want to send the alert. 6. Email Address (To): Input the email address you want to send to the alert. 7. Schedule: Arrange to send the alert when event happens or by regular time. Email Alert List SMTP Server, Account, Email Address and Schedule will be shown on the list, and can process Edit or Delete feature.
  • Page 114 Network Configuration shows all the connecting situation of LAN, WAN, Wireless and USB devices plugging. Each block shows configuration status, you may click on Refresh button to update the screen list, or Release button to release WAN IP and Renew button to get new IP address.

  • Page 115: User Account List

    3.7.2 User Account List This section shows the entire user’s account right and status. Check the user name, status and opened directory/file in this screen. 3.7.3 Event Log The NES Mini Server Router with MFP provides system log data for review.

  • Page 116: Logout

    The system log detail list is shown on this screen. Logout To logout the router via click on Logout button in Menu, and system will return to Login homepage.

  • Page 117: Personal Configuration

    Personal Configuration Open a Microsoft Internet Explorer, Mozilla Firefox or Apple Safari browser, and input http://192.168.1.1 (Default Gateway) into browser’s blank. Notice: If the homepage doesn’t appear, please check if the TCP/IP configuration is obtaining IP address automatically or not. If you don’t know how to do, please refer to “1.5 Get your IP Automatically &...
  • Page 118 Personal Panel Screen shows the Personal Panel for each right under the setting by administrator including Anonymous, My Document, My Webcam, and My Status. WE-1110 provides personal control panel for each user to entrance to each application screen, please click on each icon for application. The icons will be in gray color and can’t be clicked if the user doesn’t have the right to use that function;...

  • Page 119: Anonymous

    3.9.1 Anonymous "Anonymous" display the administrator store the file in the USB hard drive, can look into folder or make duplicate file to PC, the folder follows of detailed. After selecting "Anonymous", the data which appears administrator to share folder, can download file to go to consumer personal hard drive.

  • Page 120: My Document

    3.9.2 My Document “My Document” will show all the files in the HDD under each user’s account. Also can create the folder or copy file into web HD directly. Below description is the detail folder inside. Click on “My Document” and it’ll open another web page to show all the files in your own Web HD.

  • Page 121: My Webcam

    3.9.3 My Webcam “My Webcam” can view the on time image when turn on the web camera. The image can be viewed by “My Webcam” as below example image. Notice: If the image from webcam can’t be viewed, it may cause by Internet Security setting and need to be corrected or install the Java program.

  • Page 122: My Status

    3.9.4 My Status “My Status” shows all the login information for your personal account. Click on “Main Menu” text to back to Personal Panel and select the other personal application.

  • Page 123: Site Map

    3.10 Site Map The NES Mini Server Router with MFP provides site map clicking for each icon and do the setting easily from the home page.

  • Page 124: Chapter 4 Ap Mode

    Chapter 4 AP Mode Administrator Quick Setup Instruction Make sure to switch the operation mode into AP Mode, then open a Microsoft Internet Explorer, Mozilla Firefox or Apple Safari browser, and input http://192.168.1.254 (Default Gateway) into browser’s blank. Notice: If the homepage doesn’t appear, please check if the TCP/IP configuration is obtaining IP address automatically or not.
  • Page 125 Username and Password The factory default values for Username and Password are “admin” and “admin” (all in lowercase letters). Notice: Only the password can be changed, please read setup “4.2.4 Password Setup” or “4.5.2 Change Password”. In order to protect your own settings, it’s strongly recommended to change the password before you finish the Router Basic Setup.

  • Page 126: Quick Setup

    Quick Setup Typical Configuration Manager Page consists of two separate frames. The left frame contains all the means available for device configuration. Menus are indicated by file icons, and related menus are grouped into categories, such as LAN, Wireless and etc., and indicated by folder icon, depending on whether the group of menus are expanded or not.
  • Page 127 Quick Setup full function table list Click “Basic” botton to begin setup including LAN Setup、Wireless Setup、Time Server Setup and Password Setup. Default setting and has to be set Quick Setup of Basic instruction LAN Setup: Setup the IP Address for LAN and Group. If you are using the Router with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on the built-in Ethernet switch.

  • Page 128: Lan Setup

    4.2.1 LAN Setup If you are using the WE-1110 with multiple PCs on your LAN, you must connect the LAN via the Ethernet ports on the built-in Ethernet switch. You must assign a unique IP address to each device residing on your LAN. The LAN IP address identifies the router as a node on your network;...

  • Page 129: Wireless Setup

    4.2.2 Wireless Setup WE-1110 is based on industry standards to provide compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the router will allow you to access the data you want, when and where you want it.

  • Page 130: Time Server Setup

    4.2.3 Time Server Setup The section provides to change the Time. The Router keeps a record of the current date and time, which is used to calculate and report various performance data, but changing the router’s date and time does not affect the date and time on your PCs. You may set the time by manual.

  • Page 131: Usb Disk Management Setup

    Quick Setup Application Table List Click “Application” button to begin setup including USB Disk Management Setup, User Account Management Setup, FTP Server Setup, Web Camera Setup, Printer Server Setup, Samba Server Setup and Audio Server Setup. Default setting and has to be set. Default setting and has to be set.
  • Page 132 Select the USB Disk and click on “OK” button for refresh all disks before you do disk partition, and the “Unplug” button will appear. To partition/format the disk, please select the disk and click on “Format” button. Moreover, if you want to view the data inside the disk, please go to enable FTP server and then click on “Disk Explorer”...

  • Page 133: User Account Management Setup

    4.2.6 User Account Management Setup Personal users can use each individual application such as My Status, My Webcam and My Document. This section is to set the user’s right. Also, all the users right will be showed in User Account List and can do the edit or delete by clicking the meaning text. Input the user’s name and password, and then click on “Add”, and you will see the user information appear on the “User Account List”.

  • Page 134: Ftp Server Setup

    4.2.7 FTP Server Setup WE-1110 can be the FTP Server provides users to transmit files, also for the guest can download the files from assign website. Moreover, by connecting USB HDD, USB Flash to the router, user can easily set up a FTP Server to share or download files for local or remote users.

  • Page 135: Printer Server Setup

    Notice: Before webcam server enable, please make sure the webcam had connected to the WE-1110, otherwise, the “Enable” selection can’t be checked. 4.2.9 Printer Server Setup WE-1110 supports Multi-Function Printer (MFP) such as HP2610, supported features including printer, scanner, and cardreader. Scanner Server and Cardreader Server will be shown as Enable, therefore users can use MFP features form LAN.

  • Page 136: Samba Server Configuration Setup

    4.2.10 Samba Server Configuration Setup Samba is a software package that gives network administrators flexibility and freedom in terms of setup, configuration, and choice of systems and equipment. Support NetBIOS protocol, the consumer sharing file and printer which provides as the My Network Places.

  • Page 137: Quick Setup Finish

    4.2.12 Quick Setup Finish Below screen will be shown when the Quick Setup is completed successfully. To apply your new settings, please click on “Finish” button to reboot system automatically and goes to the Product’s Diagram Homepage. You may connect to Internet via wire or wireless at this moment according to above settings.

  • Page 138: Ip Config

    IP Config This function allows you to add routing rules into WE-1110. It doesn’t support WAN and DDNS functions. 4.3.1 Use this page to set up the local IP address and subnet mask for your router. Please select LAN under the IP Config menu and follow the instructions below to enter the LAN setting page to configure the settings you want.
  • Page 139 3. IP Gateway Input the default gateway of your LAN. 4. DHCP Enable or Disable DHCP services. The DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer if Enabled. 5. Start IP This field specifies the first address in the pool to be assigned by the DHCP server in your local network.

  • Page 140: Wireless

    4.3.2 Wireless The NES Mini Server Router with MFP enables fastest 54 Mbps IEEE802.11g wireless transmissions and keeps compatibility with existing IEEE 802.11b devices. The WE-1110 complies with IEEE 802.11b standard. Please select Wireless under the Main menu. Follow the instructions to enter the Wireless setting page to configure the settings you want. 1.
  • Page 141 ESSID and radio channel for each WE-1110 or Access Point. All WE-1110 and your wireless LAN card must have the same ESSID to allow a wireless mobile client to roam between WE-1110s. By default, the ESSID is set to “MFP_Server_Router”. 4.
  • Page 142 10. Authentication Mode Four authentication methods are supported: Open and Shared. Select Open, your wireless network would be intruded by anonymous. Not only your network bandwidth would be shared; but also transmitting data might be intercepted. Select Shared function and it can be taken effect. 11.
  • Page 143 WEP Key: At most four keys can be set. A WEP key is either 10 or 26 hexadecimal digits (0~9, a~f, and A~F) based on whether you select 64 bit or 128 bit in the WEP drop-down list. The WE-1110 must have at least the same default key. 12.

  • Page 144: Server

    the amount of data that is encrypted with the same session key. RADIUS Server IP: The IP address of RADIUS server. RADIUS Server Port: The UDP port number that the RADIUS server is listed. The default value is 1812. Shared Secret: The RADIUS server and client share a secret that is used to authenticate the messages sent between them.
  • Page 145 While USB storage device is connected, FTP Server can be selected as “Enable” 1. Enable FTP Server: The Enable for FTP Server only can be selected when USB storage device plugged. 2. Enable Anonymous to Login: Allow anonymous to login after check on Enable. 3.

  • Page 146: Web Camera Server

    4.4.2 Web Camera Server The WE-1110 has built-in Web Camera Server. By connecting web camera to the router, it allows user to monitor their home or office from remote locations. 4.4.2.1 Web Camera Server Basic Setting 1. Enable Webcam Server: Allow using this function for checking on Enable. 2.

  • Page 147: Web Camera Advanced Configuration

    4.4.2.2 Web Camera Advanced Configuration Click on “Record Setting” button, and the screen will appear as below. 1. Enable save image: If you want to save the image from webcam, please check on Enable. 2. Save image interval: For saving image, you can set the save interval time, the default value is 5 seconds.

  • Page 148: Application For Web Camera

    8. Remote FTP password: Input the remote password. 9. Remote FTP Directory: To provide option of which folder should be used for saving webcam image. 10. Back: Click on Back button for returning to Webcam Basic Setting screen. 11. Apply & Cancel Click on Apply button to continue.
  • Page 149 Web Camera Monitoring via WAN connecting For viewing the image via webcam from WAN connecting, below is the diagram. Please setting your IP address of WAN, refer the below following introduction. Step 1: First connected to LAN, input the 192.168.1.254 in the address of Web Browser. And then click on “Administrator”...
  • Page 150 Step 2: Input Username and Password of administrator; enter the setting home page. Step 3: Select the LAN under IP Config section. Your IP address must be changed to same net segment with upper network. Such as IP Address: 192.168.2.49; IP Gateway: 192.168.2.1, then select “Disable”...
  • Page 151 Step 4: Select the “Remote Management” under System Management section. Change to 800 of HTTP Connection Port. And then click on the “Apply” button. Step 5: Connected to the WAN Port of WE-1110, catch your new IP address via Release and Renew command.
  • Page 152 Step 6: Input Username and Password of your own. You will see like as below monitor screen.

  • Page 153: Web Camera Recording

    4.4.2.3.2 Web Camera Recording 4.4.2.3.2.1 Administrator Setting WE-1110 also can record the pictures from Webcam; only Administrator can do the settings. Select Web Camera Server from main Menu and Enable this function, click on Record Setting button for further setting. To setup the Webcam Advanced Configuration for each blank, and the image from webcam will be recorded into your USB HDD or Remote FTP, please refer to User’s Manual for the detail setting.
  • Page 154 webcam record files. After click on Disk Explorer, you will see the folder screen appear including all the folders inside the WE-1110. (Below is the example.) All the image files will be saved in the folder “webcam_recorded_files” , please open the file for checking.

  • Page 155: Personal Application

    4.4.2.3.2.2 Personal Application All the users under administrator’s setting can view entire webcam recording images from My Document. Please login by your own personal account. For viewing your own folder, please click on “My Document”. After click on “My Document”, you will see below folder screen appeared. Notice: If you can’t open the folder inside the FTP router, please check with administrator to setup your FTP &...

  • Page 156: Printer/Mfp Server

    4.4.3 Printer/MFP Server WE-1110 has two USB ports for connection with printers to be shared on the local area network. Follow the below steps to setup your PC to connect to a Printer/MFP server. 1. Enable Printer Server: Check Enable for applying printer server. 2.

  • Page 157: Printer Setting On Pc

    Besides above setting finished, the printer setting on PC also needs to be set as follows. 4.4.3.1 Printer Setting on PC After Enable Printer Server in Quick Setup and Printer Server Configuration, please follow below steps to set the detail LPR settings in your PC. (Below example is for Windows XP platform.) Step 1: After setting USB printer in WE-1110’s setting screen, please go to...
  • Page 158 Step 3: Click “Next” Step 4: Click the “Local printer attached to this computer”, and then click “Next”...
  • Page 159 Step 5: Click the “Create a new port” and select the “Standard TCP/IP Port”, and then click “Next” Step 6: Click “Next”...
  • Page 160 Step 7: Input the IP address of WE-1110: 192.168.1.254 (AP Mode), and then click “Next” Step 8: Select the “Custom” and click the “Settings”, and then click “Next”...
  • Page 161 Step 9: Select “LPR” and give it the same “Queue Name” as USB Printer Name as shown, and mark “LPR Byte Counting Enabled”. Finally, click on “OK” button. Step 10: Click the “Finish”...
  • Page 162 Step 11: Select the “Manufacturer” and “Printers”. If your printer doesn’t listed in the table, please install its driver CD and then click on “Have Disk…” button for installation. Or click on “Next” button to finish the setting. You can name your printer, set it as default printer and share your printer in the next screens, the Printer Server setting is getting finally.

  • Page 163: How To Scan Via Scanner

    4.4.3.2 How to scan via scanner If use the function of scanner, as long as is the software which supports scanning all can open the picture of scanning, take “Word” as an example as follows Step 1: Click “Insert” > selected “Picture” > click on “From scanner or camera” to next step. Step 2: Appear a message window;...
  • Page 164 Step 3: Set up each field value according to the demand, after complete setting, please click on “Scan” button to scan picture. 1. Image Type Include three image type: “Black & White”, “Grayscale”, and “Color(RGB)”. 2. Media Set up the media is “Reflective” or “Transparent”. 3.

  • Page 165: Audio Server

    7. Resolution Set up the dpi. 8. Auto Document Feeder（ （ （ （ ADF） ） ） ） If it is the paper feed type scanning machine, please enable the field. 4.4.4 Audio Server Make use of a speaker with the adapter connectivity attached, can broadcast music directly through the LAN.

  • Page 166: Samba Server

    Input the server name, default is “WE1110”. 4. Server Description You can input description of the server, default is “SAPIDO WE-1110!”. 5. Apply & Cancel Click on Apply button to finish setting. Click on Cancel button to clean the setting on...

  • Page 167: How To Enter The Sharing Floder

    4.4.5.1 How to enter the sharing floder Please follow below step. Step 1: Please click the “start”, and select “My Computer”. Step 2: In the Address blank input the IP address: \\192.168.1.254. Step 3: Appearing a window request inputs user name and password, if is an administrator, please input "admin";...

  • Page 168: System Management

    Step 4: Appear following menu, can open following to share internal data. Note: The most meetings appear four icons. 1. If connected USB flash or HDD, and then enable samba server function, it will appear a samba folder. 2. If connected USB printer or MFP, and then enable printer server function, it will appear a printer icon.

  • Page 169: Change Password

    can always reboot your WE-1110 by this setting. It’s necessary to reboot the router if it begins working improperly, please click on Reboot button to reboot the router. 4.5.2 Change Password At this section, the administrator can change the system password. Only the password can be changed, the username for administrator is “admin”...

  • Page 170: Firmware Upgrade

    1. Old Password: Input the original password you set. 2. New Password: Input the new password you want to change. 3. New Password (Confirm): Input the new password again for confirming. 4. Apply & Cancel Click on Apply button to continue. Click on Cancel button to clean the setting on this page.

  • Page 171: Driver Upload

    1. Update Firmware: Click on Browse button to browse the local hard drive and locate the firmware to be used for update. 2. OK & Cancel Click on OK button to confirm the setting finish. Click on Cancel button to clean the setting on this page.

  • Page 172: Profile Save

    1. Upload Driver Click on Browse button to browse the local hard drive and locate the dirver of USB equipment to be used for update. 2. OK & Cancel Click on OK button to confirm the setting finish. Click on Cancel button to clean the setting on this page.
  • Page 173 1. Save Settings To PC: Click on Save Button for saving the configuration setting into assigned location. 2. Load Settings From PC: Click on Browse button for searching the saving configuration from hard drive, and then click on Load button to load all the setting into the router.

  • Page 174: Remote Management

    4.5.6 Remote Management Remote Management allows the NES Mini Server Router with MFP to be configured from the Internet by a web browser. In general, only a member of your network can brose the built-in web pages to perform “Administrator” tasks. This feature enables you to perform the tasks from the remote (Internet) host.

  • Page 175: Time

    3. IP Address: Internet IP address of the computer that has access to the router. 4. Description: Input the description for the remote configuration. 5. Add, Apply & Cancel Click on Add button to increase the remote rule, click on Apply button to continue, or click on Cancel button to clean the setting on this page.

  • Page 176: Upnp Setting

    2. Set the Time Select this item to setup time by manual, select the date and time from each drop-down list. 3. Set Time Set the time of PC into the router. 4. Apply & Cancel Click on Apply button to continue, or click on Cancel button to clean the setting on this page.

  • Page 177: User Account Management

    1. Enable/Disable UPnP: Select Enable to activate this service. 2. Apply, Cancel Click on Apply button to add the settings into the list table. Click on Cancel button to clean the setting on this page. 4.5.9 User Account Management Personal users can use each individual application such as My Status, My Webcam and My Document.
  • Page 178 1. Max Login User: Setup the maximum users to login at the same time, select the number from drop-down list. If you want to change the maximum login users only without changing user’s information, please click on OK button after select login user’s number.

  • Page 179: Folder Management

    8. User Account List The list will show you all the user’s name, password, status and right. 4.5.10 Folder Management Easy to check all the USB storage devices connected to your WE-1110, view the entire data folder inside each storage devices, and you can do the disk formatting / partition via click on the button in this page.

  • Page 180: Email Alert

    3. Moreover, if you want to view the data inside the disk, please go to “4.4.1 FTP Sever Setup” to enable FTP server and then click on “Disk Explorer” to view all the disks folders inside the device. Notice: You have to click on “Unplug” button before remove the USB devices from WE-1110.
  • Page 181 1. Email Alert: Check the Enable box to activate the email alert service. 2. SMTP Server: Specify an IP address of the SMTP server which can send mails from your WE-1110 to the recipients’ mailboxes directly. 3. Your Mail (from): Input the email address indicated the sending location. 4.

  • Page 182: Log & Status

    8. Email Alert List SMTP Server, Account, Email Address and Schedule will be shown on the list, and can process Edit or Delete feature. 9. Add, Apply & Cancel After finish above setting, click Add button to create the alert rule. Click on Apply button to add the settings into the list table.

  • Page 183: User Account List

    Each block shows configuration status, you may click on Refresh button to update the screen list. User Account List This section shows the entire user’s account right and status.

  • Page 184: Event Log

    Check the user name, status and opened directory / file in this screen. Event Log The NES Mini Server Router with MFP provides system log data for review. The system log detail list is shown on this screen. You can click “Refresh” button to update this screen information.

  • Page 185: Logout

    Logout To logout the router via click on Logout button in Menu, and system will return to Login homepage. Personal Configuration Open a Microsoft Internet Explorer, Mozilla Firefox or Apple Safari browser, and input http://192.168.1.254 (Default Gateway) into browser’s blank. Notice: If the homepage doesn’t appear, please check if the TCP/IP configuration is obtaining IP address automatically or not.
  • Page 186 Personal Panel Screen shows the Personal Panel for each right under the setting by administrator including Anonymous, My Document, My Webcam, and My Status. WE-1110 provides personal control panel for each user to entrance to each application screen, please click on each icon for application. The icons will be in gray color and can’t be clicked if the user doesn’t have the right to use that function;...

  • Page 187: Anonymous

    4.8.1 Anonymous "Anonymous" display the administrator store the file in the USB hard drive, can look into folder or make duplicate file to PC, the folder follows of detailed. After selecting "Anonymous", the data which appears administrator to share folder, can download file to go to consumer personal hard drive.

  • Page 188: My Document

    4.8.2 My Document “My Document” will show all the files in the HDD under each user’s account. Also can create the folder or copy file into web HD directly. Below description is the detail folder inside. Click on “My Document” and it’ll open another web page to show all the files in your own Web HD.

  • Page 189: My Webcam

    4.8.3 My Webcam “My Webcam” can view the on time image when turn on the web camera. The image can be viewed by “My Webcam” as below example image. Notice: If the image from webcam can’t be viewed, it may cause by Internet Security setting and need to be corrected or install the Java program.

  • Page 190: My Status

    4.8.4 My Status “My Status” shows all the login information for your personal account. Click on “Main Menu” text to back to Personal Panel and select the other personal application.

  • Page 191: Site Map

    Site Map The NES Mini Server Router with MFP provides site map clicking for each icon and do the setting easily from the home page.

  • Page 192: Chapter 5 Client Mode

    Chapter 5 Client Mode Administrator Quick Setup Instruction Make sure to switch the mode into Client Mode, then open a Microsoft Internet Explorer, Mozilla Firefox or Apple Safari browser, and input http://10.64.64.64 (Default Gateway) into browser’s blank. Notice: If the homepage doesn’t appear, please check if the TCP/IP configuration is obtaining IP address automatically or not.
  • Page 193 Username and Password The default values for Username and Password are “admin” and “admin” (all in lowercase letters). Notice: Only the password can be changed, please read setup “5.2.4 Password Setup” or “5.5.2 Change Password”. In order to protect your own settings, it’s strongly recommended to change the password before you finish the Router Basic Setup.

  • Page 194: Quick Setup

    Quick Setup Typical Configuration Manager Page consists of two separate frames. The left frame contains all the means available for device configuration. Menus are indicated by file icons, and related menus are grouped into categories, such as LAN, WAN and etc., and indicated by folder icon, depending on whether the group of menus are expanded or not.
  • Page 195 Quick Setup Basic Table List Click “Basic” button to begin setup including Site Survey、Wireless Setup、Time Server Setup and Password Setup. Default setting and has to be set Quick Setup of Basic instruction Site Survey: Search the wireless signal of AP to connect. Wireless Setup: Define the Wireless Mode, ESSID, TxRate, Channel and other wireless settings.

  • Page 196: Site Survey

    5.2.1 Site Survey You can see which AP singal in your range. Click “Rescan” button to search all wireless singal. Selecting you want to connec SSID, like Mini_Broadband_Router and then click “Next” button. 5.2.2 Wireless Setup Appear wireless signal information of Mini_Broadband_Router. If it has setting encryption type, you must setup the same encryption type and the same key, too.

  • Page 197: Time Server Setup

    5.2.3 Time Server Setup The section provides to change the Time. The Router keeps a record of the current date and time, which is used to calculate and report various performance data, but changing the router’s date and time does not affect the date and time on your PCs. After finish setting, please click “Next”...

  • Page 198: Password Setup

    5.2.4 Password Setup Here suggest changing the password for logging into the configuration manager under security reason. The password may consist of A-Z, a-z, 0-9, underscores, and a single dot (.) For changing password, please fills the password information into above blanks, and then clicks on “Next”...
  • Page 199 Quick Setup Application Table List Click “Application” button to begin setup including USB Disk Management Setup, User Account Management Setup, FTP Server Setup, Web Camera Setup, Printer Server Setup, Samba Server Setup and Audio Server Setup. Default setting and has to be set. Default setting and has to be set.

  • Page 200: Usb Disk Management Setup

    5.2.5 USB Disk Management Setup Easy to check all the USB storage devices connected to your WE-1110, view the entire data folder inside each storage devices, and you can do the disk formatting via click on the button in this page. Select the USB Disk and click on “OK”...

  • Page 201: User Account Management Setup

    5.2.6 User Account Management Setup Personal users can use each individual application such as My Status, My Webcam and My Document. This section is to set the user’s right. Also, all the users right will be showed in User Account List and can do the edit or delete by clicking the meaning text. Input the user’s name and password, and then click on “Add”, and you will see the user information appear on the “User Account List”.

  • Page 202: Ftp Server Setup

    5.2.7 FTP Server Setup WE-1110 can be the FTP Server provides users to transmit files, also for the guest can download the files from assign website. Moreover, by connecting USB HDD, USB Flash to the router, user can easily set up a FTP Server to share or download files for local or remote users.

  • Page 203: Web Camera Server Setup

    5.2.8 Web Camera Server Setup If you plan to use the WE-1110 as a Web Camera site, connect a supported USB Web Camera to the USB port of the WE-1110. To enable the webcam server and access from WAN as demand.

  • Page 204: Printer Server Setup

    5.2.9 Printer Server Setup WE-1110 supports Multi-Function Printer (MFP) such as HP2610, supported features including printer, scanner, and cardreader. Scanner Server and Cardreader Server will be shown as Enable, therefore users can use MFP features form LAN. If the printer isn’t connected, you can’t choose “Enable”.

  • Page 205: Samba Server Configuration Setup

    5.2.10 Samba Server Configuration Setup Samba is a software package that gives network administrators flexibility and freedom in terms of setup, configuration, and choice of systems and equipment. Support NetBIOS protocol, the consumer sharing file and printer which provides as the My Network Places.

  • Page 206: Quick Setup Finish

    5.2.12 Quick Setup Finish Below screen will be shown when the Quick Setup is completed successfully. To apply your new settings, please click on “Finish” button to reboot system automatically and goes to the Product’s Diagram Homepage. You may connect to Internet via wire or wireless at this moment according to above settings.
  • Page 207 1. IP Address The default value of LAN IP address is 10.64.64.64 for this router. 2. IP Netmask Input Subnet Mask, normally it is 255.255.255.0. 3. DHCP Enable or Disable DHCP services. The DHCP server will automatically allocate an unused IP address from the IP address pool to the requesting computer if Enabled.

  • Page 208: Site Survey

    Site Survey Please select “Site Survey” under the “IP Config” menu. Link Mode Please select “Infrastructure” or “Ad_hoc”, to enable wireless. RTS Threshold This value should remain at its default setting of 2347. The range is 0-2347 bytes. Should you encounter inconsistent data flow, only minor modifications are recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled.
  • Page 209 Setting the Fragmentation too low may result in poor network performance. Only minor modifications of this value are recommended. SSID Wireless network name, it is selected AP name in Quick Setup. bg Mode This field indicates the 802.11g interface mode. “802.11g” prevents the 802.11b clients from accessing the router.
  • Page 210 Note: 128 bits WEP is most secure, but has more encryption/decryption overhead. Note that all wireless devices must support the same WEP encryption bit size and have the same key. Four keys can be inputed here, but only one key can be selected at a time.

  • Page 211: Server

    Server WE-1110 provides FTP Server, Web Camera Server, Printer / MFP Server, Audio Server, Samba Server application. FTP Server By directly connecting USB storage devices to any USB port, FTP server can be created with simple configuration. FTP Server utility allows both local and remote users to upload or download files, pictures or MP3 music form the same storage device in most easy and timely fashion.
  • Page 212 3. Enable FTP Access from WAN Allow FTP access from WAN side by checking on Enable for this item. 4. FTP Server Port Define the FTP command transfer service port. If you want to change this port number, remember to change the service port setting of your FTP client, also. 5.

  • Page 213: Web Camera Server

    Web Camera Server The WE-1110 has built-in Web Camera Server. By connecting web camera to the router, it allows user to monitor their home or office from remote locations. 5.4.2.1 Web Camera Server Basic Setting 1. Enable webcam server Allow using this function for checking on Enable. 2.

  • Page 214: Web Camera Server Advanced Configuration

    5.4.2.2 Web Camera Server Advanced Configuration Click on “Record Setting” button, and the screen will appear as below. Enable save image If you want to save the image from webcam, please check on Enable. Save image interval For saving image, you can set the save interval time, the default value is 5 seconds. Save Location Set the save location for webcam image, you may save into USB HDD or Remote FTP;...

  • Page 215: Application For Web Camera

    Remote FTP user & password Input the user’s name and password you like and it will be used to save the webcam image into the FTP server. Remote FTP Directory To provide option of which folder should be used for saving webcam image. Back Click on Back button for returning to Webcam Basic Setting screen.
  • Page 216 Webcam Monitoring via WAN connecting For viewing the image via webcam from WAN connecting, below is the diagram. Please setting your IP address of WAN, refer the below following introduction. Step 1: Selecting the “Log & Status” under “Network configuration”, check the IP address of wireless AP.
  • Page 217 Configuration menu, to check IP of WAN is 192.168.1.14. Step 3: Select the Virtual Server of NAT under Advance menu, and Enable virtual server function. Input 192.168.10.3 to the Private IP. Prvate Port and Public Port both input 80. Click Add to add list, and then click Apply to save setting.
  • Page 218 Step 4: Link the cable of WAN to PC, open web browser and input http://192.168.1.14/webcam.html to address; it will appear the Login screen. Step 5: After input your Username and Password, you will see the web camera monitor screen.

  • Page 219: Web Camera Recording

    5.4.2.3.2 Web Camera Recording 5.4.2.3.2.1 Administrator Setting WE-1110 also can record the pictures from Webcam; only Administrator can do this setting. Select Web Camera Server from main Menu and Enable this function, click on Record Setting button for further setting. To setup the Webcam Advanced Configuration for each blank, and the image from webcam will be recorded into your USB HDD or Remote FTP, please refer to User’s Manual for the detail setting.
  • Page 220 record files. After click on Disk Explorer, you will see the folder screen appear including all the folders inside the WE-1110. (Below is the example.) All the image files will be saved in the folder “webcam_recorded_files”, please open the file for checking.

  • Page 221: Personal Application

    5.4.2.3.2.2 Personal Application All the users under administrator’s setting can view entire webcam recording images from My Document. Please login by your own personal account. For viewing your own folder, please click on “My Document”. After click on “My Document”, you will see below folder screen appeared. Notice: If you can’t open the folder inside the FTP router, please check with administrator to setup your FTP &...

  • Page 222: Printer / Mfp Server

    Printer / MFP Server The WE-1110 has two USB ports for connection with printers to be shared on the local area network. Follow the below steps to setup your PC to connect to a Printer/MFP server. 1. Enable Printer Server: Check Enable for applying printer server. 2.

  • Page 223: Printer Setting On Pc

    5.4.3.1 Printer Setting on PC After Enable Printer Server in Quick Setup and Printer Server Configuration, please follow below steps to set the detail LPR settings in your PC. (Below example is for Windows XP platform.) Step 1: After setting USB printer in WE-1110’s setting screen, please go to start >...
  • Page 224 Step 3: Click “Next” Step 4: Click the “Local printer attached to this computer”, and then click “Next”...
  • Page 225 Step 5: Click the “Create a new port” and select the “Standard TCP/IP Port”, and then click “Next” Step 6: Click “Next”...
  • Page 226 Step 7: Input the IP address of WE-1110: 10.64.64.64 (Client Mode), and then click “Next” Step 8: Select the “Custom” and click the “Settings”, and then click “Next”...
  • Page 227 Step 9: Select “LPR” and give it the same “Queue Name” as USB Printer Name as shown, and mark “LPR Byte Counting Enabled”. Finally, click on “OK” button. Step 10: Click the “Finish”...
  • Page 228 Step 11: Select the “Manufacturer” and “Printers”. If your printer doesn’t listed in the table, please install its driver CD and then click on “Have Disk…” button for installation. Or click on “Next” button to finish the setting. You can name your printer, set it as default printer and share your printer in the next screens, the Printer Server setting is getting finally.

  • Page 229: How To Scan Via Scanner

    5.4.3.2 How to scan via scanner If use the function of scanner, as long as is the software which supports scanning all can open the picture of scanning, take “Word” as an example as follows Step 1: Click “Insert” > selected “Picture” > click on “From scanner or camera” to next step. Step 2: Appear a message window;...
  • Page 230 Step 3: Set up each field value according to the demand, after complete setting, please click on “Scan” button to scan picture. 1. Image Type Include three image type: “Black & White”, “Grayscale”, and “Color(RGB)”. 2. Media Set up the media is “Reflective” or “Transparent”. 3.

  • Page 231: Audio Server

    8. Auto Document Feeder（ （ （ （ ADF） ） ） ） If it is the paper feed type scanning machine, please enable the field. 5.4.4 Audio Server Make use of a speaker with the adapter connectivity attached, can broadcast music directly through the LAN.

  • Page 232: Samba Server

    3. Server Name Input the server name, default is “WE1110”. 4. Server Description You can input description, default is “SAPIDO WE-1110!”. 5. Apply & Cancel Click on Apply button to finish setting. Click on Cancel button to clean the setting on this...

  • Page 233: How To Enter The Sharing Floder

    5.4.5.1 How to enter the sharing floder Please follow below step. Step 1: Please click the “start”, and select “My Computer”. Step 2: In the Address blank input the IP address: \\10.64.64.64. Step 3: Appearing a window request inputs user name and password, if is an administrator, please input "admin";...
  • Page 234 Step 4: Appear following menu, can open following to share internal data. Note: The most meetings appear four icons. 1. If connected USB flash or HDD, and then enable samba server function, it will appear a samba folder. 2. If connected USB printer or MFP, and then enable printer server function, it will appear a printer icon.

  • Page 235: System Management

    System Management The WE-1110 provides system management including Reboot, Change Password, Firmware Upgrade, Driver Upload, Profile Save, Remote Management, Time, UPnP Setting, User Account Management, Folder Management and Email Alert setting. Following is each setting. 5.5.1 Reboot If you had inputed the wrong configuration while setting up your router or other utilities, you can always reboot your WE-1110 by this setting.

  • Page 236: Change Password

    5.5.2 Change Password At this section, the administrator can change the system password. Only the password can be changed, the username for administrator is “admin” and can’t be changed anymore. 1. Old Password: Input the original password you set. 2. New Password: Input the new password you want to change. 3.

  • Page 237: Firmware Upgrade

    5.5.3 Firmware Upgrade You can upgrade the firmware of the WE-1110 at this page. Make sure the firmware you want to use is on the local hard drive of the computer 1. Update Firmware: Click on Browse button to browse the local hard drive and locate the firmware to be used for update.

  • Page 238: Driver Upload

    5.5.4 Driver Upload Provide consumer update the driver of the USB equipment; include an USB web camera, USB printer/MFP and the USB Flash/hard drive etc. equip. 1. Upload Driver Click on Browse button to browse the local hard drive and locate the dirver of USB equipment to be used for update.

  • Page 239: Profile Save

    5.5.5 Profile Save To backup the current configuration setting or load the backup data, also you can restore the WE-1110 to default setting by this function. 1. Save Settings To PC: Click on Save Button for saving the configuration setting into assigned location.

  • Page 240: Remote Management

    5.5.6 Remote Management Remote Management allows the WE-1110 to be configured from the Internet by a web browser. In general, only a member of your network can brose the built-in web pages to perform “Administrator” tasks. This feature enables you to perform the tasks from the remote (Internet) host.

  • Page 241: Time

    4. Description: Input the description for the remote configuration. 5. Add, Apply & Cancel Click on Add button to increase the remote rule, click on Apply button to continue, or click on Cancel button to clean the setting on this page. 6.
  • Page 242 3. Set Time Set the time of PC into the router. 4. Apply & Cancel Click on Apply button to continue, or click on Cancel button to clean the setting on this page. 5.5.8 UPnP Setting Universal Plug and Play, UPnP) UPnP ( allows users to connect their UPnP-enabled broadband router, printer server and other devices right to the network with...

  • Page 243: User Account Management

    5.5.9 User Account Management Personal users can use each individual application such as My Status, My Webcam and My Document. This section is to set the user’s right. Also, all the users right will be showed in User Account List and can do the edit or delete by clicking the meaning text. 1.

  • Page 244: Folder Management

    3. Password: Setup the user’s password. 4. Group Right: Enable the use to view the webcam’s recording files. 5. User Right: Allow the user to monitor from webcam or use FTP server. 6. Activated: Click on On to allow the user’s right can be applied immediately. 7.

  • Page 245: Email Alert

    1. Select the USB Disk and click on OK button for refresh all disks before you do disk partition, and the Unplug button will appear. 2. To partition/format the disk, please select the disk and click on Format button. 3. Moreover, if you want to view the data inside the disk, please go to “5.4.1 FTP Sever Setup”...
  • Page 246 1. Email Alert: Check the Enable box to activate the email alert service. 2. SMTP Server: Specify an IP address of the SMTP server which can send mails from your WE-1110 to the recipients’ mailboxes directly. 3. Your Mail (from): Input the email address indicated the sending location. 4.
  • Page 247 8. Email Alert List SMTP Server, Account, Email Address and Schedule will be shown on the list, and can process Edit or Delete feature. 9. Add, Apply & Cancel After finish above setting, click Add button to create the alert rule. Click on Apply button to add the settings into the list table.

  • Page 248: Log & Status

    Log & Status The WE-1110 provides the log list and status of connection, user’s account. 5.6.1 Network Configuration Network Configuration shows all the connecting situation of LAN, Wireless and USB devices plugging. Each block shows configuration status, you may click on Refresh button to update the screen list.

  • Page 249: User Account List

    5.6.2 User Account List This section shows the entire user’s account right and status. Check the user name, status and opened directory/file in this screen. 5.6.3 Event Log The NES Mini Server Router with MFP provides system log data for review. The system log detail list is shown on this screen.

  • Page 250: Logout

    Logout To logout the router via click on Logout button in Menu, and system will return to Login homepage. Personal Configuration Open a Microsoft Internet Explorer, Mozilla Firefox or Apple Safari browser, and input http://10.64.64.64 (Default Gateway) into browser’s blank. Notice: If the homepage doesn’t appear, please check if the TCP/IP configuration is obtaining IP address automatically or not.
  • Page 251 Personal Panel Screen shows the Personal Panel for each right under the setting by administrator including Anonymous, My Document, My Webcam, and My Status. WE-1110 provides personal control panel for each user to entrance to each application screen, please click on each icon for application. The icons will be in gray color and can’t be clicked if the user doesn’t have the right to use that function;...

  • Page 252: Anonymous

    5.8.1 Anonymous "Anonymous" display the administrator store the file in the USB hard drive, can look into folder or make duplicate file to PC, the folder follows of detailed. After selecting "Anonymous", the data which appears administrator to share folder, can download file to go to consumer personal hard drive.

  • Page 253: My Document

    5.8.2 My Document “My Document” will show all the files in the HDD under each user’s account. Also can create the folder or copy file into web HD directly. Below description is the detail folder inside. Click on “My Document” and it’ll open another web page to show all the files in your own Web HD.

  • Page 254: My Webcam

    5.8.3 My Webcam “My Webcam” can view the on time image when turn on the web camera. The image can be viewed by “My Webcam” as below example image. Notice: If the image from webcam can’t be viewed, it may cause by Internet Security setting and need to be corrected or install the Java program.

  • Page 255: My Status

    5.8.4 My Status “My Status” shows all the login information for your personal account. Click on “Main Menu” text to back to Personal Panel and select the other personal application.

  • Page 256: Site Map

    Site Map The NES Mini Server Router with MFP provides site map clicking for each icon and do the setting easily from the home page.

  • Page 257: Chapter 6 Ddns Service Account

    Chapter 6 DDNS Service Account DDNS is a service changes the dynamic IP to the static IP. The settings of DDNS can solve the problem of being given the different IP by router every time. After setting the Router, your hostname would correspond to your dynamic IP.
  • Page 258 【 【 【 【 Step3】 】 】 】 Please finish these blank fields. Then, click on Create Account button.
  • Page 259 【 【 【 【 Step4】 】 】 】 When you got this account created message, close it, and check your mailbox. You would get a mail from DynDNS website.
  • Page 260 【 【 【 【 Step5】 】 】 】 1. Click on the mail. 2. Click on the address: https://www.dyndns.org/account/confirm/xxx 【 【 【 【 Step6】 】 】 】 Click on login.
  • Page 261 【 【 【 【 Step7】 】 】 】 Click on the My Services under Account. 【 【 【 【 Step8】 】 】 】 And then click on Add Host Services.
  • Page 262 【 【 【 【 Step9】 】 】 】 Click on Add Dynamic DNS Host. 【 【 【 【 Step10】 】 】 】 1. Select one of the tails you like. 2. Then, click on Add Host button. 【 【 【 【 Step11】 】 】 】 Your hostname have been created.

  • Page 263: Chapter 7 Q & A

    Chapter 7 Q & A Installation Q: Where is the XDSL Router installed on the network? A: In a typical environment, the Router is installed between the XDSL line and the LAN. Plug the XDSL Router into the XDSL line on the wall and Ethernet port on the Hub (switch or computer).

  • Page 264: Ip Address

    A: Re-plug your power adapter. Then, check the STATUS indicator; if it is off, the internal flash memory is damaged. For more help, please contact with your provider. IP Address 1. Q: What is the default IP address of WE-1110 for LAN port? A: Router Mode: Default IP address is 192.168.1.1/24 AP Mode: Default IP address is 192.168.1.254/24 Client Mode: Default IP address is 10.64.64.64/24...

  • Page 265: Os Setting

    OS Setting 1. Q: Why can’t my computer work online after connecting to WE-1110? A: It’s possible that your Internet protocol (TCP/IP) was set to use the follow IP address. Please do as the following steps. (Windows 2000 & XP) Start＞Settings＞Network and Dial-up Connections＞double click on Internet Protocol(TCP/IP)＞select obtain IP address automatically＞...
  • Page 266 verifications so that your Web browser can read configuration pages inside your router. Launch your Web browser. Internet Explorer Users: 1. Click on Tools > Internet Options > Connections tab. 2. Select Never dial a connection, click on Apply button, and then click on OK button.

  • Page 267: We-1110 Setup

    WE-1110 Setup 1. Q: Why does WE-1110’s setup page shut down unexpectedly? A: If one of the pages appears incompletely in the WE-1110’s setup pages, please click on Logout item in the Main Menu before it shutting down. Don’t keep it working. Then, close Internet browser and open it again for going back to the previous page.

  • Page 268: Wireless Lan

    5. Q: My WE-1110 cannot connect to the ISP? A: There are three possible solutions: 1. Check the Cable/XDSL modem is power on. 2. Check the Cable/XDSL link light is on to verify a good physical connection. 3. Check the WAN port LED to verify if the Cable/XDSL modem is connected to the router: If your ISP Login method is following, please make sure the username and...
  • Page 269 it can provide this unique identifier. This is similar to the function of your network's Workgroup or Domain name. When you're experiencing conductivity problems, it is always best to keep things simple. So next you are going to do is that, please disable any WEP encryption you might have configured.
  • Page 270 Both your PC and the Wireless Access Point must have the same setting for WEP. The default setting for the Wireless Router is disabled, so your wireless station should also have WEP disabled. If WEP is enabled on the Wireless Router, your PC must have WEP enabled, and the key must match.
  • Page 271 5. Q: I can’t connect to the Wireless Router to configure it. A: Check the following: The Wireless Router is properly installed, LAN connections are OK, and it is powered ON. Make sure that your PC and the Wireless Router are on the same network segment.

  • Page 272: Usb Ftp Server

    2. USB FTP Server 1. Q: How to add account under USB FTP server? A: To add a new account, Username and Password couldn’t have blank space into the words, and the password should be 1 to 8 letters. When input the words, the character will always show hexad (6) “*”...

  • Page 273: Printer Server

    A: No, WE-1110 only supports the webcams as Chapter 8 shows. Please refer to P276. 4. Q: Why couldn’t see the image of USB Webcam from WAN? A: Besides make sure to enable the USB Webcam Access from WAN, the Remote Management should be enabled also, and then the image of USB Webcam could be seen from WAN.

  • Page 274: Others

    A: Any platform that supports Ethernet and TCP/IP is compatible with the Router. 8. Others 1. Q: Why can’t I receive corrupted FTP downloads? A: If you are experiencing corrupted files when you download a file with your FTP client, try using another FTP program. 2.

  • Page 275: Chapter 8 Appendix

    Chapter 8 Appendix The USB equipment of WE-1110 supports, row form as follows. WE-1110 support LPR protocol, if printer driver can install in Windows 98/200/XP. Samba Printer Printer Card Samba LPR Printer Scanner Folder Brand Model Reader Printer Sharing EPSON CX2900 Pass Pass...

  • Page 276: Web Camera

    Web Camera The table below is just for reference. We will update it irregularly. We suggest you refer to the information in our website. Vender Name Product Name SAPIDO AW-0001 0x2470 Gsmart mini 3Com Home Connect Lite 3DeMON...
  • Page 277 Aiptek Pocket DV5300 Aiptek Mini PenCam 2M Aiptek PocketCam 3M Aiptek PocketCam 2M Aiptek PenCam SD 2M Aiptek/Sunplus Mini Pencam 1.3 Aiptek/Sunplus Generic spca536a Aiptek/Sunplus Mini PenCam-1.3 Apex Digital/Sunplus Digitrex 2110 Arowana 300kCmos BenQ DC 1016 BenQ DC 1300 BenQ DC 3410 BenQ DC 35...
  • Page 278 Creative Webcam Mobile Creative Creative NX Pro Creative Creative NX Pro2 Creative Creative Live! Creative PC Cam 600 Creative PC Cam 350 Creative PC Cam 750 Creative NX Ultra Creative Vista Creative Vista Plus Creative Labs WebCam (model PD1001, alternate version) WebCam Plus ("WebCam Mini";...
  • Page 279 Generic 350 Mp Generic Generic webcam Genius VideoCamV2 Genius VideoCamV3 Genius VideoCam Web Genius Cam Look312p Genius VideoCam Express Genius VideoCam GE111 Genius VideoCam GE112 Genius VideoCam Express V2 Genius Dsc-1.3M Smart Genius NB350 GigaTechCompagny/Sunplus TDC 202A GrandTec V.Cap Hama Sightcam 100 Hawk UC-110...
  • Page 280 Labtec NoteBooks Labtec Webcam Elch2 Labtec Labtec Webcam LDLC LDLC LDLC Sweety Cam LPC-UM10 LPC-UM15 Lic 100 Logitech QuickCam Orbit/Sphere Logitech QuickCam 3000 Pro Logitech QuickCam 4000 Pro Logitech QuickCam Notebook Pro Logitech Traveler Logitech Clicksmart 310 Logitech Clicksmart 420 Logitech Clicksmart 510 Logitech...
  • Page 281 Logitech QuickCam Cool Logitech QuickCam IM/Connect Logitech QuickCam Messenger MagicVision DRCM200 Maxell Compact Pc PM3 Meade Microcular Megapix Megapix V4 Mercury Cyberpix S550v MercuryDigital Mercury Digital Pro 3.1 Mp MercuryDigital Mercury Digital Pro 2.1 Mp Micro Innovation IC 50C Micro Innovation IC 200 Microscope Camera DCM35...
  • Page 282 OmniVision OV511+/OV7120 Eval Board OmniVision OV511+/OV7620 Eval Board Opti Media Optimedia Orite SC120 Orite I-Cam Palmpix DC-85 Pcam Pcam PCcam168 PcCam168 Philips PCVC720K/40 "ToUCam XS" Philips PCVC675K "Vesta" Philips PCVC680K "Vesta Pro" Philips PCVC690K "Vesta Scan" Philips PCVC730K "ToUCam Fun" Philips PCVC740K "ToUCam Pro"...
  • Page 283 Sangha Teddy Cam Samsung Anycam MPC-M10 Samsung MPC-C10 Samsung MPC-C30 Samsung Pleomax SamPwc3800N SanSun SanSun508 Sangha Sn-535 Sigma-Apo PetCam Smile International smile Sonix Sonix generic Speed NVC350K Sweex 350 Mp Terratec TeraCam2 move1.3 ToptroIndus Toptro Trust Wb 1200P Trust WB-1400T Trust 120spaceC@M Trust...

  • Page 284: Usb Storage Device

    X10 VA11A USB Capture Zebronics ZEB 100W (V1) Zebronics ZEB 100W (V2) Update: Aug.19.2008 USB Storage Device WE-1110 support EXT3 and FAT32 file system. 1. USB Flash Drive Brand Product Model Note Panram MEMORY BLOCK USB2.0 A-DATA RB2 Lover Flash Drive USB2.0 A-DATA My Flash PD1 (512MB)

  • Page 285: Web Browser

    1. Microsoft: Windows 95、98、ME、NT、XP、2003、Vista 2. Apple: Mac OS X 10.4.7 Web Browser 1. Internet Explorer 5 above editions 2. Safari 2.03 above editions SADOGO Utility Microsoft: Windows Vista, XP（For English and Traditional Chinese）...

Table of Contents