Log Into Web Gui - Sapido RB-1842 User Manual

Input "cmd", and then click "OK".
Input "ipconfig", then press "Enter" key. Please check the IP address followed by "Default
Gateway" (In this example, the gateway IP address of router is 192.168.1.1)
NOTE: If the IP address of Gateway is not displayed, or the address followed by 'IP Address' begins with
"169.x.x.x", please recheck network connection between your computer and router, and / or go to the
beginning of this chapter, to recheck every step of network setup procedure.
2.4.1

Log into Web GUI

After your computer obtained an IP address from wireless router, please start your web
browser, and input the IP address of the wireless router in address bar, and the following
message should be shown. Please click "admin" to login the RB-1842.
Enter the User name and Password in to the blank and then Click Login. The default values
for User Name and Password are admin (all in lowercase letters).
http://www.sapido.com.tw
19 User Manual 1.0