Table of Contents
Advertisement
Data Rate
Associate Clients
Enable MAC Clone
(Single Ethernet Client)
Enable Universal Repeater
Mode (Acting as AP and
Client simultaneously)
SSID of Extended Interface
Apply Change & Reset
* Under WiFi AP Mode, there are 2 options of Network type: Infrastructure or Ad hoc. Select
Infrastructure if connecting to a wireless router or access point. Select Ad hoc if connecting directly to
another wireless adapter.
4.1.2.1
Multiple APs
The SAPIDO GR-1142 can register up to 4 SSIDs (wireless LAN group). It can be used as if
there are multiple wireless LAN access points with one product. Each SSID could be set
with different data rate, WMM and access type.
Item
Enable
Band
SSID
Data Rate
Access
http://www.sapido.com.tw/
Please select the data transmission rate.
Check the AP connectors and the Wireless connecting status.
Clone the MAC address for ISP to identify.
Allow to equip with the wireless way conjunction upper level,
provide the bottom layer user link in wireless and wired way in the
meantime.
(The IP that bottom layer obtains is from upper level.) Please also
check Section 4.1.2.2
While linking the upper level device in wireless way, you can set
SSID to give the bottom layer user search.
Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.
Description
Enable or disable the service.
Select the frequency.
Enter the SSID
Select the data transmission rate.
Enable this function can let clients use two access types:
a. LAN+WAN: the client can access to the Internet and access in the
47
User Manual v1.0.0
Advertisement
Table of Contents
