Protection
Aggregation
Short GI
RF Output Power
Apply Changes & Reset
6.2.1
Wireless Site Survey
This function provides users to search existing wireless APs or wireless base stations from
ISP. You can connect to a wireless AP manually in Wi-Fi AP mode. The designed AP will
appear on SSID column in Wireless Basic Setup page.
Please click on Refresh to refresh the list. Click Connect after select an existing AP to
connect.
http://www.sapido.com.tw
access-point communications among multivendor systems.
Please select to enable wireless protection or not.
Enable this function will combine several packets to one and transmit
it. It can reduce the problem when mass packets are transmitting.
Users can get better wireless transmission efficiency when they
enable this function.
Users can adjust RF output power to get the best wireless network
environment. Users can choose from 100%, 70%, 50%, 35%, and
15%.
Click on Apply Changes to save the setting data. Or you may click on
Reset to clear all the input data.
62
User Manual 1.0