Sapido RB-1842 User Manual page 34

Select LAN under the IP Config menu
Item
IP Address
Subnet Mask
Default Gateway
DHCP
DHCP Client Range
Static DHCP
Device Name
802.1d Spanning Tree
Clone Mac Address
Apply Change & Reset
http://www.sapido.com.tw
Description
The default IP address is 192.168.1.254
Enter the Subnet Mask address
Enter the Default Gateway address for LAN interfaces
Select DHCP type: Client, Disable, or Server under different
environment.
When enable DHCP server, you can fill in the start and end IP
address; client will be assigned an IP address from the range.
When enable DHCP server, you can set static DHCP to a network
device with specified MAC address
Input a name for this router.
Disable or Enable the 802.1d Spanning Tree Protocol (STP)
Some ISPs require MAC address registration. In this case, enter
the MAC address registered to the provider to "Clone MAC
Address"
Click on Apply Change to save the setting date, or you may click
on Reset to clear all the input data.
34 User Manual 1.0