Paradox DGP2-648 User Manual page 8

2.2.2 C
ONFIDENTIAL
The installer can program your keypad not to display the status of
your system by changing the keypad from Normal Mode to
Confidential Mode. This occurs when your keypad has been inactive
for a period of time defined by your installer. In Confidential Mode all
the indicator lights will turn off. Depending on how your keypad was
programmed by your installer, you must either press a key or enter
your User Access Code to activate Normal Mode.
2.2.3 M
ULTIPLE
If your installer has enabled this feature, your keypad will permit you
to complete more than one action without having to reenter your User
Access Code. Press the
2.2.4 I
LLUMINATION
You can adjust the illumination behind the keys to suit your
needs.
How do I adjust the illumination level?
1) Enter your
Beep. The A
2) Press the [6] key. Your keypad will emit a Confirmation Beep, the
Prg action light will illuminate and the numerical light for the
current setting will illuminate.
[ ]
3) Use the
illumination. The range is between numerical light 1 to 8 (1 being
the lowest and 8, the brightest).
4) Press the [Enter] key to save and exit.
6 User's Manual
M
ODE
-
ACTION
[Clear]
Access Code
[
action light will flash.
CCESS
[ ]
and keys to increase or decrease the
key to exit the User Menu.
. Your keypad will emit a Confirmation
]