Paradox DGP2-648 User Manual page 17

Fire Zones cannot be bypassed.
How do I bypass a zone?
1) Enter your [Access Code]. Your keypad will emit a Confirmation
Beep and the A
2) Press the [Byp] key. The P
B action light will flash.
YP
3) Enter the two-digit number(s) of the zone(s) you want to bypass
and the corresponding number(s) will illuminate. If a zone's
number is illuminated and you reenter its number, the zone will
unbypass and the number will extinguish.
If a zone's number does not illuminate and your keypad emits a
Rejection Beep, the zone may not have the Bypass feature
accessible.
4) Press the [Enter] key to save and exit. The B
remain illuminated to indicate that zones are bypassed.
5.9.1 B
YPASS
The Bypass Recall feature enables you to bypass the same zones
that were bypassed previously at the touch of a key.
How do I activate Bypass Recall?
1) Enter your [Access Code]. Your keypad will emit Confirmation
Beep and the A
action light will flash.
CCESS
RG
R
ECALL
action light will flash.
CCESS
action light will illuminate and the
Digiplex 848/DigiplexNE LED Keypads
action light will
YP
15n